Fulaike 5600 boiler descaling and anti scaling softening water treatment equipment Fulaike small civilian fully automatic water softener, 5600 control valve belongs to small civilian control valve, suitable for single valve single tank system. The 5600 control valve belongs to the category of hard water bypass valves. When used for industrial boiler soft water treatment, a hard water blocking valve must be installed at its outlet. Hard water blocking valves generally use normally open solenoid valves, which automatically close the water outlet pipeline during water softener regeneration and open the water outlet pipeline during operation. The switch of the solenoid valve is controlled by a micro switch added next to the saltwater cam.
Working principle of Fulai fully automatic water softener:
The Fulai fully automatic water softener adopts the fixed bed sodium ion exchange softening method. When the fixed bed is running, the water flows through the sodium ion exchange resin layer from top to bottom, and the calcium and magnesium ions in the water exchange with the sodium ions in the resin, softening the raw water. The resin used is 001 × 7 strong acidic styrene cation exchange resin. After the sodium ion exchange resin fails, in order to restore its softening ability, sodium ion regenerators are used for regeneration, including both co current and counter current regenerators. The regenerator is generally a salt (NaCl) solution.
2、 Working process of Fulai fully automatic water softener:
Fulai fully automatic water softeners generally use fixed bed downstream regeneration, with the working process including operation, backwashing, regeneration, displacement, forward washing, and salt tank water injection.
3、 General requirements for installation:
1. The inlet pressure should be between 0.2-0.5MPa. When the water source pressure cannot meet the requirements, a booster pump can be installed to increase the inlet pressure. If the pressure is too high, a pressure reducing valve should be installed to control the inlet pressure.
2. The inlet water temperature should be between 5-45 ℃, and the power supply should be AC 200V/50Hz.
3. The water softener should be installed on a sturdy platform with unobstructed drainage nearby and sufficient space for operation and maintenance.
4. The working environment temperature should be between 5-50 ℃, and the relative humidity should be ≤ 95% (at 5 ℃).