Fulaik 2900 dual piston industrial softened water control valve Fulaik electronic display softened water equipment fully automatic water softener is suitable for dual tank systems without the need for external valve control. Structural features: The piston is arranged horizontally, with two pistons, one controlling the regeneration program and the other achieving water inlet and outlet switching. The valve body material is lead-free brass, and a hard water bypass piston can be optionally equipped. Paired with a dual tank system or a multi tank system, it can be achieved without the need for additional valves. Suitable for boiler water softeners and other industrial water softeners.
Fulaik water softener is a fully automatic water softener that controls every step of its operation and regeneration, and uses methods such as time, flow rate, or sensors to initiate regeneration. Adjust the FLECK Fulaik series fully automatic water softener to use a time synchronous motor to control all working programs. Set the restoration cycle as needed within 7 or 12 days, and select the restoration time within 24 hours. The restoration process can also be adjusted. The Fulai flow type fully automatic water softener adopts flow control for all working procedures, and the equipment can provide continuous (or intermittent) water supply. Regeneration - The regeneration device is automatically started by the flow controller, and the regeneration program can be set as needed.
General requirements for the installation of Fulaik water softeners:
① The inlet pressure should be between 0.2-0.5MPa. When the water source pressure cannot meet the requirements, a booster pump can be installed to increase the inlet pressure. If the pressure is too high, a pressure reducing valve should be installed to control the inlet pressure.
② The inlet water temperature should be between 5-45 ℃, and the power supply should be AC 200V/50Hz.
③ The water softener should be installed on a sturdy platform with unobstructed drainage nearby and sufficient space for operation and maintenance.
④ The working environment temperature should be between 5-50 ℃, and the relative humidity should be ≤ 95% (at 5 ℃).
Application scope:
Low pressure coal and gas boiler feedwater, heat exchanger water, cooling circulating water, central air conditioning circulating water, industrial softened water, desalinated water, food and beverage, pharmaceutical industry water, high-purity water for the electronics industry, and pre-treatment of reverse osmosis systems. It can also be used for domestic water treatment in hotels, guesthouses, apartments, office buildings, as well as for softened water treatment in industries such as beverages, food, brewing, hospitals, laundry, printing and dyeing, and chemical engineering.