The fully automatic water softener of Fulaik 2850 atmospheric heating boiler is equipped with cation filling ion exchange cation resin, which realizes fully automatic control of every step of the operation and regeneration of the fully automatic water softener, and uses time, flow or sensor methods to start regeneration. Adjust the FLECK Fulaik series fully automatic water softener to use a time synchronous motor to control all working programs. Set the restoration cycle as needed within 7 or 12 days, and select the restoration time within 24 hours. The restoration process can also be adjusted. The Fulai flow type fully automatic water softener adopts flow control for all working procedures, and the equipment can provide continuous (or intermittent) water supply. Regeneration - The regeneration device is automatically started by the flow controller, and the regeneration program can be set as needed. Due to the mature technology and easy operation of the FLECK series fully automatic soft water equipment control system, the use of lead-free brass valve body fully meets food hygiene requirements, and the PTFE coated piston reduces resistance, extends service life, and ensures reliable operation.
Features of fully automatic water softener:
Automation: This equipment achieves automation of ion exchange and resin regeneration processes through program control devices.
High efficiency: The design of the water softener is reasonable, allowing the resin to work effectively and the exchange capacity to be fully utilized.
Labor saving: No need for dedicated personnel to operate, easy to install.
Water saving: The water production rate is over 98%.
Energy saving: Due to the use of siphon principle, regeneration does not require a salt pump, and the equipment power is only 3-135W.
Easy to adjust: The regeneration cycle and time can be adjusted as needed.
Tank anti-corrosion: The tank is made of fiberglass, stainless steel, and steel lined plastic materials to avoid resin contamination.
Technical Specifications:
Working pressure: 0.2-0.6MPa Standard pressure: 0.3MPa
Raw water hardness: ≤ 8mmol/L, effluent hardness: ≤ 0.03mmol/L
Raw water temperature: 2 ℃ -50 ℃ Resin model: 001 × 7
Power supply: AC220V, 50Hz Power: 3-125W
Cation loaded ion exchange cation resin 001 * 7
Common resin model for water softeners 001 * 7 Product introduction: Cationic resin 0017 is a cationic resin with sulfonic acid groups (- SO3H) on a 7% crosslinked styrene ethylene copolymer. Mainly used for softening hard water and preparing pure water, it is also used in dry wet metallurgy, sugar production, pharmaceuticals, MSG industry, as well as as as a catalyst and dehydrating agent.