YD-335IIIFrozen computer slicer

main features
This machine has memory function, automatic retraction function, automatic slice counting function, and fast slicing function to improve work efficiency. The handwheel can lock the sample clamp in any position and can be quickly interchanged. This machine can quickly freeze and slice frozen sections, while also performing routine paraffin sections.

Product parameters
Slice thickness: 1-60 μ m
Repair thickness range: 1-60 μ m
Sample horizontal displacement: 28mm
Vertical displacement of sample: 58mm
Sample retraction: 6 μ m
Slice adjustment division value: 1 μ m
Adjustment division value for repairing: 1 μ m
Slice accuracy: ± 10%
Slice section: 50 × 45mm
Freezing table area: 40 × 32mm
Size: 520 × 450 × 300mm
Large capacity debris tank
Freezing table temperature difference ≥ 60 ℃
Freezing temperature difference ≥ 50 ℃
Cut the slices at a 45 ℃ angle between the cold knife and the back of the knife, which is prone to sticking.
Equipped with memory function, automatically retains the set temperature after operation; Automatic constant temperature
Defrosting temperature display, automatically resumes cooling mode after defrosting, cooling speed takes 4-15 minutes, and the wind can reach the slicing temperature

YD-335IIIFrozen computer slicer

working principle:

The working principle of a slicer is relatively simple, which is to use the sharp cutting surface of the slicer to slice objects and materials into pieces according to a certain proportion or width. Suitable for production, pharmaceutical or other purposes.

Different slicing machines have different methods for slicing, such as processing cells or tissues in experiments to facilitate observation under a microscope. There are rotary and slide type slicers used for optical microscopes

Slicers are also needed in the paper industry, suitable for disc cutters, drum cutters, spiral cutters, etc. The disc slicer consists of a disc cutter, a casing, a feeding trough, and a transmission device. Its working principle is to use a heavy disc cutter to act as a flywheel, stabilizing the slicing process.

Another method is to cut the polymer strip into particles. This requires a special slicer, which consists of a guide plate, feeding roller, pressure roller, and rotating blade. The working principle is: the cutter head is driven by a continuously variable transmission, and the feeding roller is driven by a set of variable gears through the cutter head. The cutter head is equipped with multiple blades according to the cutting size. The cutting length can be changed by changing the gear and the speed of the belt can be changed by the continuously variable transmission.