VIP member
![France Oushen Signal SPD [Beam Lightning Protection]](http://img79.mtnets.com/5/20210425/637549696649300206838.jpg)
France Oushen Signal SPD [Beam Lightning Protection]
French Oushen Signal SPD Model: SI-XTR6-1X2/SI-XTR6-1 X4
Product details
Oushen's advanced signal SPD voltage adaptive technology can track the operating voltage of the protected equipment, automatically adjust the output value of the protection voltage, so that the output protection voltage always remains below a fixed and tolerable difference from the operating voltage of the equipment, thereby safely and reliably protecting the equipment from lightning induction and operation surge damage.
-
installation
1. A multi stranded copper wire with a power connection wire of not less than 6mm2, and a multi stranded copper wire with a grounding connection wire of not less than 10mm2. The connecting wire should be as short, straight, and thick as possible.
2. The front end of the lightning arrester should be connected in series with suitable backup protectors, fuses, or air switches. -
Installation precautions
1. During installation, the power must be disconnected and live operation is strictly prohibited. The connecting wires must meet the requirements.
2. After installation, insert the lightning protection module into place and check if it works properly.
3. The lightning arrester does not require special maintenance, it only needs to be regularly checked for loose connections and normal status indicators.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-