Four column double action hydraulic press-Fornitore globale

This series of four column double action hydraulic presses is used for cutting and shaping burrs on various aluminum and magnesium alloy die-casting products, as well as for cutting plastic products; It is also applicable to the forming of plastic materials such as sheet metal cutting, stretching, etc; Adopting advanced hydraulic circuits for mother and child cylinders Whether it is noise, speed, or power consumption, it is superior to ordinary hydraulic presses. It is a new generation four column three beam hydraulic press with high efficiency, high speed, high output, and high environmental protection. This machine is widely used in the die-casting industry.

Product features of four column double action hydraulic press:

1. This series of hydraulic machine tools is powered by a liquid pressure of 2-20MPA, and is externally connected to a three-phase AC380V 50HZ or three-phase AC220 60HZ AC power supply
2. This series of equipment uses liquid as the medium to transfer energy and adopts advanced hydraulic circuits for mother and child cylinders. The oil temperature is low, and the idle stroke speed is above 150MM/s. The working speed is below 30 MM/s
3. When the device is in standby mode and moves up and down smoothly, the noise level does not exceed 75 decibels
4. Adopting a four column three plate structure, the vertical accuracy of the movable plate is controlled by four precision guide sleeves, and the parallel accuracy of any point on the lower and upper working surfaces reaches below 0.1mm
5. The punch press has waste blowing assembly And there is a waste material chute in the center of the lower workbench
The cutting stop position of the punch press is generally controlled by a pressure switch and a position sensor
7. It has an automatic counting function, with two control modes: manual and semi-automatic. The press fit upper mold can be manually stopped within any travel range. It is equipped with an emergency rebound button and can also be equipped with an infrared hand protection device
8. Customers can adjust the pressure, stroke, punching speed, blowing time, and closing height by themselves for convenient operation;
9. The hydraulic system has a built-in oil tank at the bottom, with a clean and stable appearance
10. The output range of this series of hydraulic machinery is available from 15tf to 200 tf (1tf=1000kgf=9.8KN) )；
(Special specifications can be customized)

Hydraulic press manufacturers provide bulk production at reasonable prices, with options for fast and slow speeds to choose from