Forming Machineryhydraulic systemThere is no strict order for the design steps, and each step often needs to be interspersed with each other. Generally speaking, after clarifying the design requirements, the following steps are roughly followed.

1) Determine the form of hydraulic actuators; 2) Conduct operating condition analysis to determine the main parameters of the system;

3) Develop a basic plan and draft a hydraulic system schematic diagram; 4) Select hydraulic components;

5) Performance verification of hydraulic system; 6) Draw working diagrams and prepare technical documents.

Clarify the design requirements for hydraulic systems in molding machinery:

Design requirements are the basis for conducting each engineering design. Before formulating the basic plan and further designing various parts of the hydraulic system, it is necessary to have a clear understanding of the design requirements and other aspects related to the design content.

1) Overview of the host: purpose, performance, process flow, operating environment, overall layout, etc;

2) What actions does the hydraulic system need to complete, what is the sequence of actions, and what is the interlocking relationship between them;

3) The motion form and speed of hydraulic drive mechanism;

4) The load size and properties of each action mechanism;

5) Requirements for performance aspects such as speed regulation range, motion stability, and conversion accuracy;

6) Requirements for automation programs and operational control methods;

7) Requirements for dust, explosion, cold, noise, safety and reliability;

8) Requirements for efficiency, cost, and other aspects.

Technical requirements for hydraulic system of molding machinery:

1. Before assembly, all components need to be sorted and cleaned thoroughly

2. Assemble when conditions permit, and tighten all fasteners without any looseness during assembly.

3. The length can be customized according to specific customer needs or based on on-site craftsmanship.

4. Unqualified products must be strictly controlled and not assembled.

5. After assembly, the overall appearance is beautiful and clean.

Technical parameters of hydraulic system for molding machinery:

1. Pressure: P=16MPa 2. Flow rate: Q1=60L/min, Q2=40L/min

3. Motor power: N=7.5KW 4. Electromagnetic valve voltage: AC220V

5. Dimensions: 550X80X550 6, Net fuel tank capacity: 210L

7. Working medium oil: 46 # anti-wear hydraulic oil 8, oil working temperature: below 65 #

9. Output port: M16X1.5 10, oil drain port: M14X1.5

11. Machine color: Red

labelhydraulic systemProduct Series

Related links:hydraulic cylinder Hydraulic power unit

本文地址： http://www.shziying.com/product/product284.html