Product Introduction:

Water is closely related to our lives. For example, to illustrate the concept of hardness, we often drink water and some white water residue will settle at the bottom of the water. This is the chemical reaction of some inorganic salt substances in water at high temperatures, resulting in the precipitation of carbonates. We usually use the indicator of "hardness" to represent the content of calcium and magnesium ions in water. In written terms, the hardness of water initially refers to the ability of calcium and magnesium ions in water to precipitate soap hydration solution. The total hardness of water refers to the total concentration of calcium and magnesium ions in water, including carbonate hardness (i.e. calcium and magnesium ions that can precipitate in the form of carbonates through heating, also known as temporary hardness) and non carbonate hardness (i.e. the portion of calcium and magnesium ions that cannot precipitate after heating). Our factory's equipment adopts the principle of resin softening. When hard water passes through the resin layer, the calcium and magnesium ions of the hard water are adsorbed by the resin layer, and the sodium ions are released. This cycle continues until all calcium and magnesium ions are adsorbed. The standards used in industry, ranging from 1 to 10, are called hard water, and even higher ones are called high hard water. In the primitive state, we cannot see the ions contained in the water. Hardness water poses many hazards to human health, as well as the risk of explosion in some large boiler equipment. So it is necessary to choose technologically advanced softening water equipment.

Product parameters:

Product Name: Huahai Softening Water Equipment

Product specification: TS-2000L/H

Host size: 250 × 1300mm

Salt box size: 350 × 720Um

Hourly flow rate: 1-2T/H

Regeneration cleaning method: fully automatic time type

Softening resin: 50 liters

Softening rate: 90%

Periodic salt consumption: approximately 5KG

Highlights of this device: compact, lightweight, easy to install, space saving

Product principle:

Reverse osmosis is a high-tech membrane separation technology that mainly utilizes the permeation principle of semi permeable membranes to apply a pressure in a certain way that is opposite to the natural permeation direction, causing water in concentrated solutions to permeate into dilute solutions. This method is called reverse osmosis. The so-called reverse osmosis refers to applying a pressure higher than the osmotic pressure of the solution itself at the inlet of the raw water (reverse pressure), allowing water to pass through the membrane. The dissolved impurities in the raw water cannot pass through the membrane and are discharged from the concentrated water end, thus achieving the purpose of desalination.

technological process:

Single stage process design: Raw water tank → Raw water pump → Sand filter → Carbon adsorber → Softener (or metering dosing system) → Fine filter → High pressure pump → Reverse osmosis device → Ozone generator → Pure water tank → Water point

Double stage process design: raw water → raw water booster pump → multi-media filter → activated carbon filter → water softener (or metering dosing system) → fine filter → first stage high-pressure pump → first stage reverse osmosis host → intermediate water tank → second stage high-pressure pump → second stage reverse osmosis host → pure water tank → pure water pump → water consumption point

Application areas:

1. Water usage in the food and beverage industry

Beverages, dairy industry, brewing, preparation water, low alcohol blending water, pure draft beer filtration

2. Bottled and bottled drinking water

Drinking purified water, natural water, mineral water, mineralized water

3. Family and group type water purification equipment

High quality water supply network systems for buildings, communities, hotels, airports, real estate properties, and water purification equipment for swimming pools.

Product price: