1、 Soaking medicineDry powder dosing deviceWorking principle

The preparation process of polymer solution is gradually processed by grading each solution tank. The solution tanks are separated from each other. Ensure optimal reaction time and constant concentration in each solution tank. Avoid any direct pathways between the pre tank and the final solution tank. The device is automatically controlled by a control box. This control box is connected to the liquid level gauge installed on the final solution tank. Once the liquid level reaches the "low level", the electric inlet valve is triggered to open. The contact type flowmeter starts the dry injection process. The size of the dry injection is determined by the amount of water to obtain accurate concentration. Once it reaches the "high level", this cycle process stops. Of course, two (or three) mixers are still working. This device is also used to continuously and automatically prepare latex like cationic, anionic, or non-ionic polymers into solutions with standard dilution concentrations (0.3-5g/L). Although it is generally believed that latex like polymers require significantly less curing time to produce standard solutions than powdered polymers, it is always recommended to have sufficient curing time in order to achieve optimal drug consumption.

2、 Product characteristics of foam powder dosing device

Highly integrated integrated integrated equipment

◆ Fully automated control function:

The device has a small size, simple operation, and easy installation, requiring only water and power sources on site;

The liquid medicine mixer is made of stainless steel integrated production, with a 100% dissolution effect;

◆ Safe and reliable work. Stable performance:

Good corrosion resistance. All materials in contact with the medium are made of engineering plastics and stainless steel

◆ It is suitable for both dry powder and fiber materials, materials that are difficult to dissolve, prone to clumping, and require high dosing requirements, as well as for the preparation and dosing of liquid materials;

Stainless steel bottom G-value efficient specialized deceleration mixer to prevent the breakage of large molecular chains.

3、 Standard configuration of foam powder dosing device

1. Three box solution tank with three discharge outlets;

2. Two mixers and one metering pump;

3. The inlet platform includes a pressure reducing valve and a shut-off valve

4. Dry speculation with hopper;

5. Liquid level switch and level gauge;

6. Control box, overflow port, dosing port, solenoid valve, flow meter.

4、 Data parameters of foam powder dosing device

Specification and model	configuration parameter				control mode
	Volume (L)	Pump and bucket configuration	material	Dimensions L × W × H (mm)
ZK-450	650	Single unit 2 slots	304	/	Manual buttons/Automatic instrument control/PLC touch/DCS remote/GPRS wireless/Special requirements (explosion-proof, variable frequency, etc.) Power supply: 220V/380V 50Hz
ZK-1000	1250	Single 3 slots	304	/
ZK-1500	1700	Single 3 slots	304	/
ZK-2500	2700	Single 3 slots	304	/
ZK-1500P	1700	Single 3 slots	PVC/PP	/
ZK-2500P	2700	Single 3 slots	PVC/PP	/
ZK-4000P	4250	Single 3 slots	PVC/PP	/
ZK-6500P	6720	Single 3 slots	PVC/PP	/

5、 Picture display of foam powder dosing device

Engineering case pictures
Engineering schematic diagram	Process schematic diagram

6、 Application fields of foam powder dosing device

Foam powder dosing deviceMainly used in municipal water supply, sewage treatment, nuclear power, petroleum, chemical, thermal power generation raw water treatment, and wastewater treatment.