Product Introduction

The LOWLINE float switch SWITCH-TEK series LV10 is a universal point type float level switch that uses a 15VA reed switch output to reliably detect the liquid level of relatively clean water and chemical solvents. Applicable media include boric acid and ultrapure water. Damping body can eliminate the oscillation of liquid level switch caused by disturbance. The immersion liquid leakage detection sensor is made of polypropylene (PP) or polyvinylidene fluoride (PVDF) material, vertically installed in the storage tank, and used for high or low liquid level alarm.

Technical Specifications

Installation position: Vertical installation ± 20 °

Accuracy: ± 2mm (in water)

Repeatability: ± 1mm (in water)

Specific gravity: minimum 0.8

Contact type: (1) SPST spring

Contact output: normally open (NO) or normally closed (NC) optional

Working temperature: -40 ℃ to 90 ℃

Pressure: 2 bar at 25 ℃, temperature per

Increase by 1 degree and decrease by 0.113 bar

Protection level: NEMA 6 (IP68)

Sensor material: PP or PVDF

Cable sheath: PP or PFA

Cable type: 3-core shielded

Cable length: 10 "(3m)

Installation interface: 3/4 "NPT

Grade: Universal Type

Certification: CE