Feed Moisture Meter XFSFY-120CL adopts the national standard method (drying and heating weight loss method) and uses the German HBM weighing system to ensure accurate weighing; Circular quartz tungsten halogen lamp with heat source for rapid drying of samples; During the drying process, the moisture content of the sample is continuously measured and displayed in real-time. After the drying process is completed, the final measured moisture content value is locked and displayed.

Feed is the general term for the food of all animals raised by humans. Narrowly defined, feed mainly refers to the food of animals raised in agriculture or animal husbandry. Feed includes more than ten varieties of feed materials such as soybeans, soybean meal, corn, fish meal, amino acids, miscellaneous meal, whey powder, fats, meat and bone meal, grains, and feed additives

The infrared heating method of the feed moisture analyzer ring quartz tungsten halogen can directly heat the material from the inside, greatly reducing the drying time, and also has the advantages of uniform heating, cleanliness, high efficiency, and energy saving. (The tungsten halogen ring lamp injects halogen gases such as iodine or bromine into the infrared lamp. At high temperatures, the sublimated tungsten wire reacts chemically with the halogen, and the sublimated tungsten will re solidify on the tungsten wire, forming a balanced cycle to avoid premature breakage of the tungsten wire. Therefore, tungsten halogen lamps are longer than ordinary infrared lamps.)

Feed Moisture Meter XMain features:

(1) Small size, light weight, simple structure

(2) No need for auxiliary equipment

(3) Easy to operate, no need for installation, debugging or training

(4) High efficiency and fast speed, with an overall operation time of no more than 10 minutes

(5) Multiple analysis methods, fully automatic, timed, and semi-automatic to meet various analysis needs

(6) Standard RS232 communication interface - convenient for connecting printers, computers, and other peripheral devices

XFSFY-120CLFeed Moisture Meter XTechnical parameters:

1. Weighing range: 120g

2. Moisture determination range: 0.01-99.99%

3. Sensor accuracy: 0.001g

4. Sample quality: 1g-120g

5. Repeatability: ± 0.05% when the initial sample weight is ≥ 5g, ± 0.02% when the initial sample weight is ≥ 10g

6. Heating temperature range: Initial -180 ℃

7. Analysis method: Three endpoint judgment methods can be selected: 1. Fully automatic 2. Timed 0.1-99 minutes 3. Custom mode

8. Heating source: 500W halogen lamp heating

9. Moisture content readability: 0.01%

10. Display parameters: moisture%, solid content%, drying time, temperature, weight

11. Communication interface: Standard RS232 communication interface - convenient for connecting printers and computers, in compliance with FDA/HACCP format requirements

12. Dimensions: 330 * 205 * 165 (mm)

13. Power supply: 220V ± 10%

14. Frequency: 50Hz ± 1Hz

15. Scale pan size (mm) diameter 110

Technical knowledge: The moisture index of feed is an important indicator of feed processing quality and a significant indicator of feed quality. It is specifically used to predict the freshness and storage period of feed products, maintain nutritional content, prevent feed mold, and is one of the important factors affecting feed hygiene.

The method for determining the moisture content of feed is specified in GB6435 "Method for Determining the Moisture Content of Feed". The scope of application of this standard is: applicable to the moisture content of compound feed and single feed, except for dairy products, animal and vegetable oils and minerals used as feed. With the development of the feed industry, the variety of feed is constantly increasing, and additives are widely used in the feed industry. There is currently no prescribed method for determining the moisture content of premix and additives. Therefore, some feed testing institutions use the GB6435 method when measuring premix and additives. Due to the limitations of this method, it often results in higher moisture content for better feed quality. For example, the branded products of a certain enterprise have other indicators that are better than the standard requirements, but the moisture content test result is as high as 32.9%. In addition, some products with poor internal quality have just qualified moisture content;
According to the requirements of GB/T5915-1993 "Combination Feed for Piglets, Growing and Fattening Pigs", GB/T5916-1993 "Combination Feed for Egg laying Reserve Chickens, Egg laying Chickens, and Broiler Chickens", and SB/T10262-1996 "Combination Feed for Growing Ducks, Egg laying Ducks, and Meat Offspring Ducks", the moisture content is ≤ 12.5%. According to the provisions of GB8830-1988 "Pre mixed Feed for Trace Elements in Egg laying Chickens, Broiler Chickens, Piglets, and Growing and Fattening Pigs" and GB8831-1988 "Compound Pre mixed Feed for Egg laying Chickens, Broiler Chickens, Piglets, and Growing and Fattening Pigs", the moisture content is ≤ 10%. According to the standards of flavoring agent enterprises, there are many factors that affect the quality of feed when the moisture content is ≤ 10%. Among the many factors, the It is one of the important factors affecting the quality of feed processing. In the process of feed processing, the moisture content of powder has a significant impact on the quality of finished pellet/expanded feed, mold control, processing efficiency, equipment loss, production cost, and animal production performance. Low moisture content results in low starch gelatinization rate and poor durability of granular/expanded feed, leading to a decrease in feed conversion rate and affecting the production performance of livestock and poultry; At the same time, low moisture content in powder can also affect the yield and energy consumption of feed processing, leading to problems such as low moisture content in finished feed. On the contrary, if the moisture content of the powder is too high, it can easily cause clogging of the mold and mold growth in the feed, leading to a decrease in animal production performance and even causing diseases. Therefore, in the feed industry, appropriate moisture content is an important processing parameter