Product Introduction

FIP(FLS) PH200C＆ORP200CEpoxy resin based glass bubble electrode suitable for online or immersion measurementpHandORPThe products provided include single knot and double knot versions, as well as models with and without quick detachable top caps installed. In addition, for the automatic temperature compensation function（ATC）, can use integrated temperature sensorspHOptions. These epoxy resin electrodes have high chemical resistance to materials and are suitable for multiple applications. The use of a simple and reusable filler cap allows for cost-effective online installation of electrodes, while the one equipped with an extension tube3/4”The joint is sufficient for immersion installation. Special products can be installed with just one nut addedFIP TShaped pipe fittings andFIPOn the saddle clamp.

application

• Water treatment

• Neutralization system

• Water quality monitoring

Swimming Pool and Hot Springs

• Aquaculture

• Agriculture and Fertilization Systems

• Process control

Main characteristics

Epoxy resin body

Single or double junction technology

• Large gel reference volume

• Quick installation system

• Outer edge cable orBNCconnect

• Version combined with temperature sensor

Special versions can be provided as needed

Low cost accessories

technical data

general rule

•Scope of operation:

- pHElectrode:0-14pH(None)Na+When there is an error, it is0-12.3pH）

- ORPElectrode:± 2000 mV

•Temperature compensation equipment (applicable toTCMode):PT1000

•Pipeline size range:DN15 - DN100（0.5” - 4”）

•New electrode performance zero voltage point:7.00pH ± 0.2pH

•New electrode performance efficiency:> 97% @ 25°C (77°F)

•New electrode performance response time:

- pH:95%The signal has been changed to2second

- ORP: depends on the application

•Reference:

-Electrolyte:

gel3.5M KCl(Single version)

KCl-KNO3(Double ended version)

•Process connection:

-Online installation:

Thread Joint”、¾”perhapsPG13.5

FLSInstall accessories

-Immersion installation

•Working pressure/Operating temperature:

- 7 bar (100 psi) @ 25°C (77°F)

- 1 bar (14,5 psi) @ 65°C (149°F)

•Welding materials:

-Body: Epoxy resin

- OLoop structure: Silicone resin

-Connection:Pellon ®

-Sensing surface: glass film（pH）Platinum（ORP）

• OCircle:NBR（PH222 CD、PH223 CD、ORP222CD、ORP223CD）

FIP(FLS) PH＆ORP 200Epoxy resin body glass foam electrode modelPH200C; PH222CD; PH223CD; ORP200C; ORP222CD; ORP223CD.

•Common modelsPH200C

Description:PHElectrode, ring resin body.Glass bubble electrode comes with its own5Meter cable, requires configurationEG50PperhapsEG75P 1/2"perhaps3/4"Pressure pad adapter