※　intelligenceHARTFieldbus protocol;

※　Small, lightweight, sturdy and vibration resistant;

※　Range and zero point are continuously adjustable externally;

※　Adjustable damping;

※ sceneLCDDisplay components can be rotated and adjusted;

※　Good one-way overload protection characteristics;

※　No mechanical movable parts, low maintenance workload;

※　Unified structure across the entire series, with strong interchangeability of components;

※　Explosion proof structure, all-weather use;

※　The membrane material in contact with the medium can be selected; Membrane optional316L、TAN、HAS-C、MONELWait for corrosion-resistant materials;

● Change in sensor volume

less than0.16cm³

● Indicator table

On site digital display

● Explosion proof type

Intrinsically SafeExiaIICT6 Ga;Explosion proof typeExdIIBT6 Gb

● Range and Zero Point

External continuous adjustable

● Overpressure limit

The range is6MPaThe following application:0(Absolute pressure)~14MPa

● Resistance Buddhist nun

exist0.2～16Continuously adjustable between seconds

● Start Time

2Seconds, no preheating required

● refined linear measure

±0.5％

● stability

＜±0.25％FS/year

● Temperature influence

≤±0.60%At maximum range, every28℃Change amount)

● Static pressure effect

≤±0.60%(At maximum range)

● vibration effect

In any axial direction, the frequency is10 Hz～150HzThe error caused is less than the maximum range±0.05%, range code2(Micro differential pressure) is±0.25%

● Power supply impact

Less than the output range0.005%/V

● Load impact

When the power supply is stable, there is no load impact

● Installation location impact

Maximum production capacity0.24kPaZero point error, but correctable and has no impact on the measurement range

● Structural materials

Isolation membrane:316Stainless steel, Hastelloy alloyCMonel alloy, tantalum

ORing (medium contact area): Fluororubber, PTFE

Filling fluid: silicone oil or inert oil

Electrical casing: polyurethane baked paint low copper cast aluminum alloy

● Pressure connector

The connecting screw holes on the pressure chamber are1/4NPTThe connecting screw hole on the pressure joint is1/2NPTThe center distance can be found in the external dimension drawings of various models

The screw hole for connecting the signal cable isM20×1.5

● degrees of protection provided by enclosure

IP65