Product Introduction: The XMT-7000 dual five digit intelligent digital display regulator adopts high-resolution A/D conversion devices and high-precision voltage reference devices,The software has also been optimized and designed, using new algorithms with high accuracy and strong anti-interference ability. The instrument uses a dual row five digit digital display to simultaneously display the measured value and the set value. The ID parameters, hysteresis, upper and lower limit alarm values, percentage of manual output, and error correction caused by sensors can all be set and displayed in real time by a touch switch on the panel. The performance price ratio is significantly ahead of similar imported products. The instrument can input various sensors and signals such as voltage, current, frequency, etc., and can be used for measuring and controlling parameters such as pressure, flow rate, and liquid level. In combination with platinum resistors, it can also be applied to high-precision temperature measurement and automatic control within the range of -19.99 ℃ to 600.00 ℃ in industries such as textile, rubber and plastic machinery, incubators, test chambers, refrigeration, chemical, and medical.

(New product)

Main technical indicators:

1. Basic error: ≤± (0.2% F.S+1d)

2. Typical regulation stability: ± 0.03 ℃

3. PID parameter setting range: P=0.0~20.0%; I＝0～2000s； D＝0～1000s

4. Range of hysteresis setting: 0.2 ℃ to 20.0 ℃

5. Error correction range: -20.00 ℃ to 20.00 ℃

6. Adjustment and alarm value setting range: 0-100% of the instrument's full range

Network optimization materials:

The K59 thermostat is a constant temperature open type thermostat produced by RANCO company. Currently, domesticallyProfessional electronic temperature controller manufacturerMost refrigerators are imported from Qingdao. Thermostats have very stable performance and are generally not damaged or scrapped. In occasional abnormal start stop situations, as long as the refrigeration conditions of the refrigerator must be normal or basically normal, the problem can be solved by adjusting the parameter adjustment screw of the thermostat. If the cooling is too poor and the parameter difference is too large, the adjustment margin of the thermostat may not meet the requirements, and the problem of insufficient cooling must be solved first. If the cooling capacity is slightly insufficient, causing the thermostat to be unable to control the start and stop according to normal conditions, thenBrand electronic temperature controller manufacturerIt can be adjusted to match the existing cooling conditions and achieve normal start stop control. When adjusting the thermostat, it is important to correctly select the adjustment screw, adjust the direction, and control the adjustment amount to avoid excessive or chaotic adjustments that may not achieve the desired adjustment effect