Technical Specifications

1. High temperature catalytic oxidation, with liquid up to 1000 degrees and solid up to 1500 degrees
2. Measurement range:
TOC：0-30000ppm; Solid maximum 150mg absolute carbon content
TN：0-300ppm
3. Injection volume: 0.01-0.5ml
4 TOC measurement principle: NDIR
5. TN measurement principle: NDIR, chemiluminescence method, solid-state electrochemical method
6. Synchronized analyzer TOC and TN, reaction conditions*
7. Equipped with a uniquely designed dual furnace system that can analyze liquid and solid samples, and can also be configured with solid modules

Main Features

1. High temperature catalysis, the highest temperature can reach 1000 degrees, using CeO catalyst, durable, good catalytic effect, and can also use Pt, CuO and other catalysts.
2. Electronic airflow control technology, VITA technology, can balance the errors caused by airflow fluctuations and ensure the reproducibility of measurements.
3. The detection limit of TOC is 50ppt, and the detection limit of total nitrogen can reach 50ppb, and results can be obtained simultaneously with one injection. Meet the vast majority of analysis requirements
4. Can be equipped with a solid measurement module, with a reaction temperature of 1300 degrees, and the highest configuration can achieve a reaction temperature of up to 1500 degrees
5. Can withstand high salt content samples, with a maximum salt content of 85g/L and a maximum suspended particle size of 630um
6. Automatic sampler 60/112 position
7. Standard curves can be drawn according to different injection volumes, without the need to prepare low concentration standard solutions, reducing systematic errors.
8. Can be equipped with PDA type