VIP member
Ete Environmental TF-160 * 180L-C Oil Absorption Filter
TF oil suction filter is a specialized equipment directly installed at the oil pump suction port to protect the oil pump and other hydraulic component
Product details
Product Introduction
This filter is installed at the suction port of the oil pump to protect the oil pump and other hydraulic components from inhaling pollutants and impurities, effectively controlling hydraulic system pollution and improving the cleanliness of the hydraulic system.
This filter can be directly installed on the side, upper or bottom of the fuel tank. The oil suction cylinder penetrates below the liquid level in the mailbox, and the filter head leaks outside the mailbox. It is equipped with self sealing valve, bypass valve, filter element pollution blockage transmitter and other devices, so that the oil in the tank will not flow out when replacing and cleaning the filter element. This product has the advantages of novel design, easy installation, high oil flow capacity, low resistance, and convenient cleaning or replacement of the filter element.
Technical Parameter
Working medium: general hydraulic oil, phosphate grease, hydraulic oil emulsion, water, ethylene glycol
Flow rate: 45-70L/min
Filtering accuracy: 10-80 μ m
Work pressure: 0.6MPA
Connection method: Thread
application area
In construction machinery, hydraulic transmission is commonly used, such as excavators, tire loaders, truck cranes, track bulldozers, tire cranes, self-propelled loaders, graders, and vibratory rollers.
Hydraulic technology is also widely used in agricultural machinery, such as combine harvesters, tractors, and plows.
In the automotive industry, hydraulic off-road vehicles, hydraulic dump trucks, hydraulic aerial work vehicles, and fire trucks all use hydraulic technology.
Performance characteristics
1. The TF-160 * 180L-C oil suction filter can be directly installed on the side, bottom, or top of the fuel tank. The filter head is exposed outside the fuel tank, and the oil suction cylinder is immersed below the liquid level in the tank. The oil outlet is equipped with pipe and flange connections, and the filter is equipped with self sealing valves and other devices to eliminate the need for other pipe fittings such as shut-off valves, making the pipeline simplified and easy to install.
2. Setting a self sealing valve makes it very convenient to replace, clean the filter element or repair the system:
When replacing, cleaning the filter element or repairing the system, simply unscrew the filter end cover (cleaning cover), and the self sealing valve will automatically close, isolating the oil circuit of the fuel tank and preventing the oil in the tank from flowing out, making cleaning, replacing the filter element or repairing the system very convenient. If the self sealing valve is opened, it can also be used to discharge oil from the tank.
3. The TF-160 * 180L-C oil suction filter is equipped with a filter element contamination transmitter and an oil circuit bypass valve, which improves the reliability of the hydraulic system
When the filter element of TF-160 * 180L-C oil suction filter is blocked by pollutants and the vacuum degree at the oil outlet is 0.018MPa, the transmitter will send a signal, and the filter element should be replaced or cleaned in a timely manner. If the machine cannot be stopped immediately or no one comes to replace the filter element at this time, the oil circuit bypass valve located on the upper part of the filter element will automatically open (opening value: vacuum 0.02MPa) to avoid suction failure of the oil pump. But at this time, the machine should be stopped to replace or clean the filter element to maintain the cleanliness of the hydraulic system and improve its reliability.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-