1. Control mode: Manual/automatic, remote control function supports manual control, automatic control, remote control of water pump start and stop, and the control mode can be switched;

2. Time setting: The control time of the diesel engine can be set, including: start-up delay time, preheating or pre slip time, start-up cut-off time, start-up cut-off speed, rapid operation time, acceleration process time, cooling shutdown time;

3. Alarm shutdown: Automatic alarm and shutdown items: no speed signal, overspeed, low speed, low oil pressure, high net temperature, startup failure, shutdown failure, open/short circuit of oil pressure sensor, open/short circuit of water temperature sensor, open/short circuit of speed sensor, low water pressure of water pump, etc;

4. Warning items: Pre warning items: overspeed, low speed, low oil pressure, high cooling temperature, low air temperature, low fuel level, low battery voltage, high battery voltage, uncalibrated speed signal, and low water pressure in the water pump;

5. Status display: Diesel engine operation status display: Based on the current actual situation of the system, display the current status of the equipment: standby, startup, fuel supply, startup, startup delay, rapid delay, normal operation, clean shutdown, emergency shutdown;

6. Parameter display: Diesel engine parameter measurement display: During system operation, display the current relevant parameter values: speed, running time, fuel quantity, battery voltage, cooling temperature, and oil pressure.

Parameter Description

Flow range for conveying liquids: 5~500L/s

Head range: 0.15~1.6m

Supporting power range: 30~400KW

Rated speed: ≤ 1.6MPa

Working conditions

1. The medium density shall not exceed 1240kg/m3;

2. The ambient temperature is ≤ 50 ℃, the medium temperature is ≤ 80 ℃, and special requirements can reach up to 200 ℃;

3. The pH value of the medium is 6-9 for cast iron and 2-13 for stainless steel;

4. The self-priming height should not exceed 4.5-5.5 meters, and the length of the suction pipe should be ≤ 10 meters;

5. The speed is generally 1400r/min~1800r/min, 2900r/min.

Model diagram

Application Fields

The XBC-KDS diesel engine fire pump set is designed according to the standard GB6245-2006 "Performance Requirements and Test Methods for Fire Pumps". This series of products has a wide range of head and flow, fully capable of meeting the fire water supply needs of various industrial and mining enterprises such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas stations, and textiles. The advantage is that in the event of a sudden power outage in the building's electrical system, the electric fire pump cannot be started, and the diesel fire pump automatically starts to provide emergency water supply.

Product parameters