Electrolytic mold ultrasonic cleaning machine, non-standard customized cleaning equipment manufacturer, direct sales, filtration, circulation, home delivery

1、 Main parameters:

Note: Ultrasonic equipment can be customized according to customer requirements such as size, power, etc!

2、 Introduction to Kejin Electrolytic Mold Ultrasonic Cleaning Machine:

1. The electrolytic ultrasonic cleaning system consists of an ultrasonic generation system, an electrolytic circuit system, a circulating filtration system, a control system, and a dedicated metal mold

Composed of mold cleaning solution and water-based rust inhibitor. The electrolytic cleaning system emits gas onto the metal surface and removes the metal using the effect of a sauna

Surface dirt and debris can be completely removed from the mold, including rust spots, carbon deposits, gas, resin components, moisture, and oil stains, through ultrasonic testing

The vibration of sound waves causes dirt to peel off, float up, and metal to adhere to the cathode. Even dirt in relatively small corners can be completely removed.

2. Restore the metal to its original steel green color and restore its original beauty.

3. Even complex shapes can remove dirt.

4. It can completely and accurately clean and remove dirt.

5. Has good rust removal and prevention effect.

6. It saves one hour of time compared to manual cleaning.

7. More environmentally friendly and safer than using solvents.

8. Greatly reduced the defect rate after cleaning.

3、 Equipment usage:


4Ultrasonic cleaning is the process in which a transducer converts electrical energy into mechanical energy. During this process, the transducer transfers enormous energy to the cleaning solution, creating positive and negative pressure zones in the liquid, forming tens of thousands of void bubbles that continuously explode and impact the surface of the metal being cleaned, causing the dirt on the metal surface to quickly detach.

For more details, please consult customer service or call to learn more!