product description
brand | Jiuyun | model | JYVB7200 |
Customized processing | correct | material | cast iron |
Purpose/Scope of Use | adjust | Drive mode | electric |
Flow direction | two-way | Pressure environment | Atmospheric pressure |
Nominal Diameter | DN40-DN300mm | Temperature range | 0-150℃ |
Maximum differential pressure | 2.5MPa | origin | Hebei |
Working principle
Hebei Jiuyun Electric Three way Temperature Control ValveIt is a typical application in temperature control fields such as HVAC. The controller has PI and PID regulation functions, accurate control, multi loop control, diverse functions, and can achieve control of fluid flow rate, pressure, pressure difference, temperature, humidity, enthalpy value, and air quality. The actuator has electric mechanical and electric hydraulic types, with manual and automatic adjustment functions, sensitive adjustment, large shut-off force, and adjustable flow characteristics (linear percentage). Electric hydraulic actuator with power-off automatic reset protection function, can receive 0-10V or 4-20mA signals and has valve position feedback function. The valve body is a flow regulating valve, suitable for regulating chilled water, low-pressure hot water, domestic hot water, high-pressure hot water, seawater, hot oil, and steam in circulation pipelines. It has good linearity, large adjustability, tight sealing, high temperature resistance, and anti cavitation
Three way temperature control valveMainly used for single tube systems with crossing pipes, its diversion coefficient can vary within the range of 0 to, and there is a lot of room for flow regulation, but the price is relatively expensive and the structure is complex. Two way temperature control valves are used in both double pipe systems and single pipe systems. The resistance of the two-way temperature control valve used for dual tube systems is relatively high; The resistance for single tube systems is relatively low. The temperature sensing bulb of the temperature control valve is generally assembled as a whole with the valve body, and the temperature sensing bulb itself is the indoor temperature sensor on site. If necessary, remote temperature sensors can be used; The remote temperature sensor is placed in the room that requires temperature control, and the valve body is placed in a certain part of the heating system