VIP member
Electric high-temperature resistant regulating valve
Electric high-temperature resistant regulating valve
Product details
ZDLPG high-temperature resistant electric regulating valve, also known as electric high-temperature regulating valve, is a model of electric regulating valve specially designed and produced for high-temperature medium pipelines. The electric high-temperature regulating valve is equipped with a heat sink between the valve body and the actuator to protect the actuator from malfunction or damage caused by high temperature. Electric high-temperature resistant regulating valve is mainly used for temperature control200Gas or liquid medium pipelines.
1ZDLPGOverview of Electric High Temperature Resistant Regulating Valve
ZDLPW electric high-temperature resistant regulating valve is a type of electric regulating valve developed and produced to adapt to high-temperature medium pipelines. Ordinary electric regulating valves are used for applications higher than200When using a medium, high temperature can be transmitted through the valve stem to the actuator, causing damage or short service life of the electric actuator. In order to adapt to these high-temperature operating conditions,Electric high-temperature regulating valveA heat sink is installed between the electric actuator and the valve body. When used for pipeline transportation of high-temperature media, the heat sink can isolate high temperature conduction to the electric actuator, and will not cause damage to the electric actuator due to high temperature conduction. The valve body can be made of carbon steel or stainless steel according to the temperature of the medium transported by the pipeline, and the sealing adopts metal hard sealing to ensure temperature resistance600°.
The electric high-temperature resistant regulating valve, like other electric regulating valve models, can receive signals sent by the controller4-20MaWait for analog signals to control valve opening in order to adjust pipeline medium parameters. Suitable for medium pipelines of various high-temperature gases or liquids.
IIZDLPGTechnical parameters of electric high-temperature resistant regulating valve
|
Valve body form |
Direct Casting Ball Valve |
|
Nominal Diameter |
DN20～300mm |
|
nominal pressure |
PN 1.6、2.5、4.0、6.4、10.0 MPa |
|
Flange standard |
GB/T9113、JB/T79、HG20594And other standards |
|
Connection form |
flange(FF RF RTJ)Welding(SW BW)Thread(apply to1Within ") |
|
Valve cover form |
High temperature type+250～+450℃, ultra-high temperature type+250～+560℃ |
|
Cover type |
Bolt compression type |
|
Packing |
VType PTFE packing, PTFE impregnated asbestos packing, asbestos textile packing, graphite packing |
|
Material |
cast steel(WCB)Stainless steel(CF8、CF8M、CF3、CF3M)Chromium molybdenum steel |
|
Valve core form |
Single seat, sleeve, cage type |
|
Traffic characteristics |
Linear, equal percentage |
|
Valve core material |
stainless steel(304、304L、316、316L) |
|
Model of actuator |
3810LSeriesPSLSeriesDKZSeries and imported actuators |
|
Main technical parameters |
Power supply voltage:220V/50HzInput signal:4-20mAperhaps1-5V·DCOutput signal:4-20mA·DC Protection level: equivalentIP55Explosion proof signs:ExdⅡBT4Hand operated function: joystick Environmental temperature:-25～+70℃, environmental humidity: ≤95% |
IIIZDLPGPerformance parameters of electric high-temperature resistant regulating valve
|
project |
Indicator value |
||
|
Basic error% |
join in marriage3810L±2.0; MatchingPSL±1.0 |
||
|
return difference% |
join in marriage381L±2.0; MatchingPSL±1.0 |
||
|
dead zone% |
1.0 |
||
|
Always point deviation% |
teletransmission |
Starting point ±2.5 |
End point ±2.5 |
|
Starting point ±2.5 |
End point ±2.5 |
||
|
Electricity off |
Starting point |
±2.5 |
|
|
End |
±2.5 |
||
|
Rated travel deviation% |
≤2.5 |
||
|
Leakage amountL/h |
0.01%Rated capacity of valve |
||
|
Adjustable rangeR |
50：1 |
||
4ZDLPGFlow coefficient and allowable pressure difference of electric high-temperature resistant regulating valve
|
Nominal DiameterDN |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
|
|
Valve seat diameterdN |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
|
|
rated flow coefficientKV |
Single seat |
11 |
17.6 |
27.5 |
44 |
69 |
110 |
176 |
275 |
440 |
630 |
1000 |
1600 |
|
cage |
9 |
15 |
23 |
35 |
59 |
95 |
148 |
236 |
355 |
568 |
885 |
1260 |
|
|
sleeve |
10 |
16 |
25 |
40 |
63 |
100 |
155 |
250 |
370 |
580 |
900 |
1300 |
|
|
rated travel |
16 |
25 |
40 |
60 |
100 |
||||||||
|
Allowable pressure difference(MPa) |
Single seat |
3.2 |
3.0 |
2.0 |
1.8 |
1.5 |
1.4 |
1.0 |
0,7 |
0.6 |
0.5 |
0.3 |
0.28 |
|
cage |
5.8 |
5.0 |
4.9 |
4.3 |
3.0 |
3.7 |
3.5 |
3.1 |
2.8 |
2,8 |
2.4 |
2.0 |
|
|
sleeve |
6.4 |
5.2 |
5.2 |
4.6 |
4.6 |
3.7 |
3.7 |
3.5 |
3.1 |
3.1 |
2.6 |
2.2 |
|
5ZDLPGExternal connection dimensions of electric high-temperature resistant regulating valve
|
Nominal DiameterDN(mm) |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
|
|
L |
PN16/25 |
185 |
200 |
222 |
254 |
276 |
298 |
352 |
410 |
451 |
550 |
640 |
880 |
|
PN40 |
197 |
200 |
235 |
267 |
292 |
317 |
368 |
425 |
473 |
640 |
760 |
910 |
|
|
PN64 |
200 |
210 |
251 |
286 |
311 |
337 |
394 |
440 |
508 |
670 |
810 |
950 |
|
|
H |
PN16/25 |
57.5 |
75 |
75 |
85.5 |
92.5 |
100 |
110 |
142.5 |
158 |
170 |
195 |
230 |
|
PN40 |
57.5 |
75 |
75 |
82.5 |
92.5 |
100 |
117.5 |
150 |
167.5 |
187.5 |
205 |
245 |
|
|
PN64 |
40 |
85 |
85 |
90 |
102.5 |
107.5 |
125 |
172.5 |
195 |
207.5 |
230 |
260 |
|
|
H1 |
396 |
428 |
428 |
436 |
415 |
464 |
507 |
690 |
840 |
632 |
725 |
882 |
|
|
H2 |
PSL |
465 |
465 |
465 |
465 |
560 |
560 |
560 |
560 |
560 |
788 |
788 |
788 |
|
3810 |
373 |
495 |
495 |
495 |
700 |
700 |
700 |
725 |
725 |
725 |
725 |
725 |
|
|
D |
177 |
177 |
177 |
177 |
182 |
182 |
182 |
182 |
182 |
218 |
218 |
218 |
|
|
R |
225 |
225 |
225 |
225 |
257 |
257 |
257 |
310 |
310 |
310 |
310 |
310 |
|
VIZDLPGOrdering Notice for Electric High Temperature Resistant Regulating Valve
If the model has not been selected before placing the order, please provide us with your usage parameters
1. Electric high-temperature regulating valve with nominal diameter and rated flow coefficient KV,
2. Fluid properties of electric high-temperature regulating valve (including nominal pressure, temperature, viscosity or acidity/alkalinity)
3. Function form of electric high-temperature regulating valve,
4. Flow characteristics of electric high-temperature regulating valve,
5. Pressure before and after the electric high-temperature regulating valve,
6. Materials for the valve body and core of the electric high-temperature regulating valve,
7. Does the electric high-temperature regulating valve come with accessories and indicate the accessory model. So that we can make the correct selection for you.
Thank you for visiting our professional regulating valve website. If you have any questions about electric high-temperature resistant regulating valves, please call us and we will be happy to serve you.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-