Easylaser E960 laser collimator
E960C1
Mainly used for measuring gas turbines or small steam turbines The detector measuring bracket with a diameter of 150-1700 mm includes a sliding tube that can measure several different positions in small diameter and deep holes without moving the bracket.
E960C2
Used for measuring large steam turbines, the standard accessory measures a diameter of 200-1700 mm. If the user needs to measure a diameter of up to 4500 mm (necessary fixtures need to be added) The movement range of the detector fixture can reach. 60 mm, which is very convenient for measurement when the diameter of the measured partition does not change much
Easylaser E960 laser collimatorMeasurement program
Single point straightness measurement
Measurement of machine guide rails, shafts, and equal diameter bearing seats
Three point straightness measurement
Measure at three positions spaced more than 20 degrees apart on the half hole
Four point straightness measurement
Measure at four positions on the entire hole: up, down, left, and right
Multi point straightness measurement
Measure multiple points on each hole or half hole
Single point straightness
quick mode
Leave the distance input box empty to measure directly without entering the distance
Electron target
Display the current measured electronic target
According to the display reference electronic target
Display of measurement result list
Select the measurement point, press the button to retest
3D graphic result display
Use the 2, 4, 6, and 8 keys on the numeric keypad to rotate the shape freely, and press the 5 key to return to the initial view
Measurement results displayed in two-dimensional graphics
Optimal straightness setting
Historical measurement points
If a point is remeasured during the measurement process, the previous measurement value will be saved as a historical measurement point To display historical measurement points, enter the straightness settings
Half hole concentricity measurement
Display the list of measurement points Select the points to be measured in the table
This table displays the calculation results of all measured points
Measurement point
adjust
4-point measurement (hole concentricity measurement)
Multi point measurement (hole or half hole)
Select the point to be measured This table displays the calculation results of all measured points
roundness
Automatically calculate roundness when measuring more than 4 points while changing position