The EC2000 second-generation professional cinema controller can achieve the following functions:

Support infrared learning function;

◇ Equipped with 6-channel infrared control function;

◇ Maximum number of scenes: 60

Single scene command count: 150;

Up to 15 external RF gateways can be expanded to achieve RF signal coverage and local control functions;

◇ Equipped with I/O control ports (i.e. 8 dry contact inputs and 4 relay outputs) for the simplest integration of third-party sensors or systems;

explain:

1. Power button: Perform power on/off operations.

2. Power indicator light (POWER): It stays on when the host is powered on and turned on, and does not light up when the power is turned off.

3. Network indicator light: When the host communicates normally through a wired network, the indicator light stays on; When communicating normally through wireless networks (including wireless transmission point mode and wireless client mode), the indicator light flashes; When the network is not connected, the indicator light does not light up.

4. Work indicator light (WORK): When the CPU is working, the indicator light flashes.

5. 1~6 infrared port working indicator lights (IR1~IR6): When the infrared channel sends a signal, the corresponding infrared port working indicator light flashes; Otherwise, the indicator light will not light up.

6. 1~6 RS232 port working indicator lights (RSA-RSF): When the RS232 port sends a signal, the corresponding port working indicator light flashes; Otherwise, the indicator light will not light up.

7. Infrared Learning Window (LEARN): For infrared learning, the distance between the device's infrared emitter and the infrared learning window should be within 10cm

explain:

8. RF antenna interface: connects to an RF antenna for receiving and transmitting RF signals.

9. I/O control port (4 relay outputs and 8 dry contact inputs): Relay outputs trigger third-party systems by outputting dry contact signals

Unified work. Dry contact input is used for the simplest integration with third-party sensors or systems;

10. 6 RS232 ports (female): Connect and control devices with RS232 serial ports.

11. Wired network interface: RJ45 interface.

12. RESET button: Press and hold the button for 5 seconds, all indicator lights will remain on, then release and the host will be reset to factory settings.

13. 6 infrared output interfaces: wired network interface, connected to the computer host where the wireless router or system configuration software is located.

14. WIFI antenna interface: connected to WIFI antenna, used for receiving and transmitting wireless network signals.

15. Power interface: Connect the power cord, suitable for most AC220V power cords on the market.