NAI-DCY-12GD, NAI-DCY-24GD current dry nitrogen blowing instrument specifications: 12 holes, 24 holes (manual, electric)

Note: Sample tube processing default diameter: 16mm (tubes larger than 16mm can be customized)

Product Description

The dry nitrogen blowing instrument NAI-DCY-12GD adopts blowing and trapping technology, and can also control the temperature and heat of the sample. It uses inert gases such as nitrogen to quickly, controllably, and continuously blow onto the surface of the sample to achieve rapid anaerobic concentration of the sample solution. Dry nitrogen blowing apparatus is mainly used for the concentration preparation of large quantities of samples, such as in the fields of pharmaceuticals, medical testing, pesticide residue detection, drug screening, hormone analysis, liquid phase, gas phase, and mass spectrometry analysis for sample preparation

Application Range

1. Pesticide analysis: vegetables, fruits, grains, plant tissues, etc

2. Pharmaceutical inspection: Traditional Chinese Medicine pharmaceuticals and drug testing

3. Environmental analysis: drinking water, groundwater, polluted water, etc

4. Bioanalysis: Serum, plasma, blood, urine

5. Product inspection: Inspection of dioxins, Croods, etc

6. Food and beverages: milk, alcohol, liquid beverages

Main characteristics: Principal character

1. Each blowing needle can be independently controlled to avoid cross contamination. The height of the instrument's air chamber can be adjusted by itself, and it is equipped with a standard air needle length of 15 centimeters.

2. NAI-DCY-12GD has 12 airway control switches to save gas, and the position of each blowing needle can be independently changed for blowing.

3. When concentrating toxic solvents, the entire system can be placed in a fume hood to reduce danger.

4. Built in over temperature protection device, automatic fault detection and alarm function, convenient to use.

5. LED display screen, temperature synchronous display, time decreasing display, can observe temperature changes in real time.

Technical parameters

1. Operating environment temperature: 5 ° C~30 ° C Relative humidity: ≤ 70%

2. Power supply: AC220V~50-60Hz

3. Temperature range: Room temperature+5 ° C~150 ° C

4. Timed time: 99 hours and 59 minutes in duration

5. Temperature control accuracy: ≤± 0.5 ° C

6. Display accuracy: ± 0.1 ° C

7. Temperature uniformity: 100 ° C ≤± 0.5 ° C

8. Temperature uniformity: 150 ° C ≤± 1 ° C

9. Heating time (40-150 ° C): ≤ 30 minutes

10. Maximum lifting stroke: 200mm Maximum gas flow rate: 15L/min

Model selection

Optional module

NAI Dry Nitrogen Blower | Dry Nitrogen Blower Quotation | Dry Bath Nitrogen Blower | Dry Heat Nitrogen Blower Quotation | Dry Nitrogen Blower Quotation