IEquipment photo, name and model:Fully automatic dual headCan sealing machine, modelFG130G2

(The equipment is upgraded irregularly, and the pictures are for reference only)

IIEquipment performance description and characteristics

1sealing diameterφ40~φ99mm， Sealing height of 60-200mm;

2Adjustable production efficiency, maximum achieved80-100 cans per minute;

3Number of cans sealed:Two, faster than a single head, saving space;

4The overall appearance material is mainly made of stainless steel304 material, thickness 1.5mm;

5The rolling cutter adopts4 rolling cutters for sealing, with more uniform sealing force and excellent sealing performance indicators;

6Adopting intelligent program design and touch screen control, easy to use and set up

7There is a missing cover alarm prompt with a cover function to ensure efficient and uninterrupted operation of the equipment;

8Setting up uncovered and unsealed cans, as well as fault detection shutdown, effectively reduces equipment failures;

9The lower cover can be covered in one go400 pieces (double bottom cover, two tube);

10Changing the caliber requires changing the mold, and the replacement time is approximately60 minutes;

11Replacing the caliber requires replacing the pressure head+Bottom cover+turntable+guardrail, different materials of cans and lids need to be replaced with sealing rollers;

12Change the height of the can seal without replacing accessories, using a hand cranked screw design, with an adjustment time of about5 minutes;

13Strict testing methods are used to test the sealing effect before shipment and delivery to ensure product quality;

14The defect rate is extremely low, with iron cans below one ten thousandth, plastic cans below one thousandth, and paper cans below two thousandths;

15The pressure head is made of chromium12 molybdenum vanadium quenching treatment, hardness exceeding 50 degrees, service life exceeding 1 million cans;

16The rollers are imported from Taiwan, and the rolling material isSKD Japanese special mold steel, with a lifespan of over 5 million sealing cycles;

17Configure conveyor belt length2.4 meters, height 0.9 meters, conveyor belt width 253mm, using double row tank feeding;

18The device size is long2.4×wide1.35 meters×tall1.8 meters, the size after packing is 2.5 meters×1.4 meters×1.94 meters;

19Net weight is approximately700KG， The gross weight is about 800KG;

20Main motor power1.1KW/380V， Conveyor belt motor 0.2KW/220V, total power: 1.3KW

21The material of the conveyor belt is nylonPOM material, the chuck is made of PP board material;

22On one side of the fuselage, there is a maintenance guide with illustrations and text, making maintenance operations simple and convenient.

23The air compressor needs to be configured separately, and the power of the air compressor is requiredGas supply pressure above 3KW and 0.6Mpa;

IIIThe electrical configuration list of the equipment is shown in the following table

IVRandom list of vulnerable parts

1. 2 fuses; 2. Approximately 5 conveyor belt chains; 3. 1 motor V-belt; 4. 8 springs

VRandom Tool List

1. A set of standard hexagonal keys; 2. 1 hook shaped wrench; 3. 1 open-end wrench each for 17 and 19; 4. 1 manual, 5 photoelectric screwdrivers

VIOptional spare parts available for purchase

1. Photoelectric switch and proximity switch; 2. Pressure head; 3. Roll cutter; 4. Cylinder; 5. Motor

VIIWarranty period

Free on-site maintenance service for quality problems within one year after equipment delivery (only in Chinese Mainland)The warranty period for spare parts is as follows:

1Core components (cam, gear, spindle, shaft sleeve, bearing, and synchronous pulley) come with a two-year free warranty;

2One year free warranty for motor and indexing disc;

3One year free warranty for programming processors, solenoid valves, relays, cylinders, photoelectric switches, proximity switches, AC contactors, touch screens, and pneumatic triplets;

4Belt and synchronous belt one-year free warranty