Product Overview:
Drug stability testing equipment and drug testing chambers operate continuously for a long time. The evaluation of drug failure requires long-term stable temperature, humidity environment, and light irradiation tests, which are the choices for pharmaceutical companies to conduct drug stability tests.
Product features:
1Fluorine free design
2Microcomputer controller, stable, accurate and reliable control304Stainless steel inner liner, square arc shape, easy to clean and operate
3The air duct circulates, and the wind inside the workspace is evenly distributed. There is a diameter on the left side of the box25mmThe testing hole.
4Continuous operation, two sets of imported compressors automatically switch to drug testing for long-term continuous operation
5Continuous operation without defrosting is required to avoid temperature and humidity fluctuations inside the box caused by defrosting during use
6Key components such as temperature and humidity controllers, compressors, circulating fans, etc. are all imported products
7Independent temperature limit alarm system, capable of sound and light alarm to alert the operator
8Alarm for low or high temperature and over temperature, alarm for high or low humidity
9Choose a humidity sensor that can operate at high temperatures to avoid the hassle of frequent replacement of dry and wet bulbs
10The ultraviolet sterilization lamp is placed on the back wall of the box, which can regularly disinfect the inside of the box and effectively kill floating bacteria in the circulating air and humidification tray water vapor inside the box, thereby preventing contamination during drug testing
11Stability test box illumination monitoring and control, using light sensors for monitoring without extreme adjustability, reducing illumination attenuation and test errors caused by lamp aging
12When the test chamber has a fever fault, the dynamic display screen will show a fault message
13Can be connected to a printer or485Communication interface, using computers and printers to record temperature and time curves for data storage and playback during the experimental process
14Adopting a large touch screen display, the screen operation is simple and the program editing is easy
15The controller operation interface is available in both Chinese and English for selection, even if the operating curve can be displayed on the screen
16have100Group program1000paragraph999The capacity of the loop steps is set at a value of for each time interval99hour59divide
17After inputting the data and experimental conditions, the controller has a screen lock function to avoid manual touch and shutdown
18havePIDAutomatic calculation function, which can immediately correct the temperature and humidity change conditions, making temperature and humidity control more accurate and stable
19configurationRS-232perhapsRS-485The communication interface can be programmed on a computer to monitor the testing process and perform functions such as power on/off.
Continuous operation:
Two sets of imported compressors automatically switch, drug testing runs continuously for a long time, and drug testing chambers run continuously for a long time
Continuous operation without defrosting, avoiding temperature fluctuations inside the box caused by defrosting during use
Quality assurance:
The temperature and humidity controller, compressor, circulating fan and other components are all imported
3、 Technical specifications:
product name |
Stability test chamber (double door left and right type) |
PRODUCT MODEL |
YP-WD1500N |
Studio Size |
1500×600×1550mm |
External dimensions |
1950×950×2150mm |
temperature range |
0 ~65℃ |
Temperature and humidity meet the conditions |
Long term operation under high temperature and high humidity conditions, such as:A.temperature45℃Corresponding humidity85% B. Temperature60℃Corresponding humidity85% C. Temperature60℃Corresponding humidity95% |
temperature fluctuation |
±0.5℃ |
temperature uniformity |
±≤2℃ |
Humidity range |
Right box:40%~95%RH |
Humidity error |
Right box:±5%RH |
Light intensity |
Left box:0~6000LXThree level control; Note: Before placing an order, an adjustable light source system with multi-layer partition light radiation sensor detection can be selected. |
Illumination error |
Left box:±500LX |
Ambient Temperature |
RT+5~35℃ |
supply voltage |
220V 50HZ |
power |
Right box: 5500W |
main controller |
PLCControl,7 inchesColor touch function, high precision control of temperature, humidity, and light intensity, convenient and intuitive, real-time viewing of temperature and humidity curve data, and automatic saving and scheduling of shutdown functions. |
monitor system |
1. Independently display the values of various operating parameters 2. Detected the upper limit temperature value and issued an alarm to cut off the power supply 3. Compressor overheating alarm detected 4. Detect water shortage and low water level alarm 5. Detect water shortage and dry burning alarm 6. Electricity measurement, power grid outage alarm, etc 7. All alarm contents are sent to the operator or device administrator for judgment and management through SMS or mobile APP (pre purchase optional confirmation). |
Data storage and transmission |
1. Equipped with real-time printing of micro printed thermal paper 2. Equipped with USB operation for data copy and transfer 3. You can query data or run curves on the main screen 4. Historical fault alarm records can be queried on the main screen 5. Capable of R485 upper computer communication operation 6. Equipped with remote internet monitoring, etc |
Rights Management |
1. The first level permission is for the operator to use the main power on/off to confirm operation and view data 2. The second level permission is to modify operational data and change experimental supply requirements 3. The third level permission is to enter the system backend to modify operational function data and perform maintenance |
time range |
Each paragraph 1~100 hours |
refrigeration/Dehumidification compressor |
Imported 'French Taikang'”3/4compressor,Two sets of independent original imported fully enclosed compressors automatically switch alternately |
refrigerant |
useR134aEnvironmentally friendly refrigerants. |
External material |
High quality cold-rolled steel plate after acid pickling, phosphating, and electrostatic spraying |
Internal material |
Universal High QualitySUS304mirror faceStainless steel plate |
Locking device |
1. The gate adopts a metal hanging and pulling locking device 2. Equipped with electronic switch electromagnetic lock to prevent accidental door opening 3. Equipped with equipment doors that are tightly closed or open to remind alarms |
water pan |
Two: one is located at the lower edge of the gate, and the other is located at the lower part of the compressor and low-temperature pipeline. There is no overflow water on the laboratory floor |
Water storage device |
1. The device comes with a built-in stainless steel water tank with a designed storage capacity40L 2. Before purchase, select the purified water filtration automatic tap water inlet function, which can achieve unmanned water addition and long-term continuous operation. |
mobile device |
For the convenience of transporting the test box, four movable casters are specially equipped for easy fixation and movement |
sample holder |
Stainless steel grid test stand3cover |
Thermal insulation material |
Rigid polyurethane foam with ultra-fine glass wool |
Heating method |
Nickel chromium alloy electric heater |
sensor |
Temperature sensor:AlevelPT100Platinum resistance; Humidity sensor: capacitive sensor |
circulatory system |
Fan forced convection method |
Safety device |
1. Equipped with grounding protection 2. Leakage protection 3. Over temperature independent cut-off heating protection 4. Overpressure alarm protection 5. Motor overload protection 6. Dry burning protection 7. Water shortage protection 8. Insufficient humidity protection prompt |
Other functions |
1. Equipped with driver disc 2. Equipped with UV sterilization system 3. Glass observation window 4. Horizontal adjustment wheels 5. Free lifting and adjustment of load partition 6. Condensate collection tray |
Supply cycle |
15 working days |