Product Introduction

Double click crusher, also known as double rotor hammer crusher, is suitable for crushing materials such as coal slag, slag, slag, shale, coal gangue, construction waste, and building waste from calcite, limestone, and brick and tile factories.

Working principle

During operation, driven by dual motors, the two sets of rotors connected in series rotate at high speed simultaneously. The material is immediately crushed by the hammer head of the rapidly rotating lower rotor in the machine cavity after being crushed by the upper rotor. The materials in the cavity collide and crush each other at high speed, achieving the effect of hammer powder and material powder, forming coal slag particles with a discharge particle size of less than 3 millimeters. This particle size can fully meet the requirements of brick and tile manufacturers as internal combustion bricks.

Performance characteristics

——Without a sieve bottom and high humidity materials, it will never clog!

1. This series of crushers uses dual rotors and two continuous crushing processes, without a screening device. All kinds of wet slag can be crushed, and can be removed from the water or crushed at any time without bonding or blockage. To control the size of the material, simply adjust the gap between the crushing hammers. Generally, crushers are blocked due to the retention of materials in the crushing chamber, resulting in increased wear and tear of related components. This series of crushers can avoid the above phenomenon.

2. High alloy wear-resistant hammer head. Hammer head and handle combination use, only replace the hammer head, not the handle.

3. Unique displacement gap adjustment technology, the hammerhead does not need to be repaired after wear and tear, and can be repeatedly used to move the position. One hammerhead can support three hammerheads for use.

4. The crusher rotates in both directions, and through continuous equal shift bidirectional operation, the wear between the hammer head and the crushing gear plate can be evenly distributed, reducing the frequency of downtime for replacing vulnerable parts.

5. The discharge particle size is uniform, the crushing ratio is large, the output is high, and the energy consumption is low. It can crush more than 20 tons of material per hour, and the cost of crushing one ton of coal slag does not exceed 1.8 yuan.

6. Suitable for fine crushing of brittle materials, non clogging, low dust, and low noise.

7. Shortened the retention time of materials in the crushing chamber and improved the service life of vulnerable parts.

8. Easy installation greatly improves the freedom of the equipment.

9. Quick maintenance, the side doors on the upper side of the crusher can be easily opened, making the maintenance and replacement of vulnerable parts of the crusher faster and more convenient, shortening the maintenance time.

10. Electric hydraulic control, one person can easily complete the operation, maintenance, component replacement, etc. of this machine.