Product Introduction:

The classic P323 improved model produced by FROMM company is a dual motor electric packing tool, portable and rechargeable, easy to carry, and packing is not limited by venue and power source. The tightening wheel is used for tightening, with high tension and adjustable size. The friction time can be adjusted according to the characteristics of the packaging tape. The tightening and friction cutting of the tape are respectively operated by two motors, which can effectively extend the service life of the machine and have an extremely low failure rate. Low maintenance cost. Especially suitable for places with harsh working environments such as brick kilns, it is a highly recommended packaging tool.

Operation method:

Wrap the plastic steel strip or plastic strapping around the object from top to bottom, then place the strapping joint into the machine's working slot. The motor drives the tightening wheel to tighten the strapping, and the strapping is bonded by friction. Finally, the strapping is automatically cut.

Precautions for packaging machine:

1. Electric packing tools are prohibited from being empty, that is, they are not allowed to work without straps to avoid gear wear.

2. Avoid falling and bumping

3. When cleaning, use a slightly damp cloth to clean the exterior. Do not use any chemicals, gasoline, solvents, turpentine, dry cleaners, etc. that can damage the outer shell.

4. Do not allow any liquid to enter the interior of the machine or soak this product in any liquid.

Battery precautions:

1. Do not dispose of batteries in trash cans, water, or fire at will to protect the environment and avoid danger.

2. To avoid battery short circuit, it should not be stored together with metal objects. Do not conduct the positive and negative terminals of the battery in any way, do not open the battery casing, and always keep it dry.

3. If the machine is not used for a long time, please remove the battery to extend its lifespan.

4. When the machine is not in use, please remove the battery to avoid rapid power loss. After being fully charged, the battery will completely lose power after about 1-2 months.

5. Batteries and chargers must be kept clean and dry, and in accordance with safety precautions to avoid danger.

Technical parameters: