VIP member
DMC2104 wheeled tractor from Dimachi
DMC2104 wheeled tractor from Dimachi
Product details
Technical parameters of this vehicle model:
| project | unit | Design value |
| The reasonable minimum power code (horsepower) for the model in this appraisal unit | / | 170 |
| Whole machine model and name | / | DMC2104 |
| Whole machine type | / | wheel type |
| Whole machine rack type | / | No shelf |
| Whole machine drive form | / | Four wheel drive |
| Application of the whole machine | / | General purpose |
| Overall dimensions of the machine (length x width x height and location) | mm | 5300 × 2430 × 3080 (top of air filter) |
| Wheelbase or track grounding length | mm | 2750 |
| Common wheelbase (front/rear) or track gauge | mm | 1850/1900 |
| Track gauge (front/rear wheels) or track gauge | mm | 1850, 1980, 2080/1830-2110 |
| Minimum ground clearance and location | mm | 500 (bottom of front axle) |
| The horizontal distance from the front end face of the clutch to the axis of the rear drive shaft | mm | 1340 |
| Center distance of gearbox gear counter shaft hole | mm | 118 |
| The horizontal distance from the center line of the drive wheel axle to the center line of the guide wheel axle of a full track tractor | mm | / |
| Minimum usage quality | kg | 6620 |
| Standard counterweight (front/rear) | kg | 360/480 |
| Ground contact pressure of track | kPa | / |
| Minimum usage ratio quality | kg/kW | 42.9 |
| Number of gears (forward/reverse) | / | 44059 |
| Number of main transmission gears | / | 4 |
| Number of auxiliary transmission gears | / | （2+1）×2 |
| Maximum theoretical design speed | km/h | 34.76 |
| *Theoretical speed of each forward gear | km/h | Forward gear: Low L: 1.62, 2.11, 2.73, 3.49; Low H: 3.77, 4.91, 6.34, 8.11; High L: 6.95, 9.06, 11.68, 14.95; High H: 16.15, 21.06, 27.17, 34.76 |
| Connection method between engine and main clutch | / | Direct connection type |
| Model of rollover protection device (cab or safety frame) | / | DMC2404-451B |
| Type of rollover protection device (cab or safety frame) | / | Simple cab |
| Roll over protection device (cab or safety frame) manufacturer | / | Weifang Zhongyuan Heavy Industry Technology Co., Ltd |
| Engine model | / | WP6G220E330 |
| Engine structural type | / | Straight line, direct injection, water-cooled, four stroke |
| Engine manufacturing plant | / | Weichai (Weifang) Medium sized Diesel Engine Co., Ltd |
| Engine intake mode | / | Boosting intercooling |
| Number of engine cylinders | / | 6 |
| Engine calibration power | kW | 154.4 |
| Rated net power of engine | kW | 162 |
| Engine calibration speed | r/min | 2200 |
| Engine cooling method | / | water-cooling |
| *Maximum allowable intake pressure drop (resistance) of the engine | kPa | 3.5 |
| *Maximum allowable exhaust back pressure of the engine | kPa | 12 |
| Air filter model | / | KLQ-518D |
| Type of air filter | / | Dry |
| External dimensions of exhaust pipe soundproof chamber | mm | Φ820×185 |
| Quality of exhaust pipe silencing chamber | kg | 10.9 |
| Driver's seat model | / | NS-TF1504 |
| Driver's seat manufacturer | / | Linqu Nansen Seat Factory |
| Seat belt model | / | 2 |
| Seat belt manufacturer | / | Baixinchi Automobile Seat Belt Factory in Hejian City |
| Steering system type | / | Fully hydraulic |
| Steering system steering control mechanism | / | Steering wheel |
| Steering system steering mechanism type | / | Front wheel steering |
| Transmission type | / | Mechanical plane composition |
| Main transmission shifting mode | / | Mechanical graded gear |
| Shift mode of auxiliary transmission | / | Mechanical graded gear |
| Tire model (front/rear) | / | 16.9-28/20.8-38 |
| Number of tires (front/rear) | individual | 43863 |
| *Tire pressure (front/rear) | kPa | 230/180 |
| Track material | / | / |
| Track shoe width | mm | / |
| Hydraulic suspension system type | / | Split type |
| Suspension device type | / | Rear three-point suspension |
| Suspension device category | / | 3 categories |
| Model of hydraulic oil pump for working device | / | CBT-G36/310 |
| Number of hydraulic output groups | / | 3 |
| Full open pressure of safety valve for working device | MPa | 19±0.5 |
| Number of splines on the power output shaft | / | 8 |
| Standard speed of power output shaft | r/min | 540/1000 optional 760/850 |
| Power output shaft transmission ratio | / | 3.542/1.995 optional 2.800/2.500 |
| Number of transmission cases | / | Number of boxes 2 |
| Main transmission position | / | In the first box |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-