DH-NM Floor Wear Tester/Paint Wear Tester/Wear Tester/Wear Tester/Wear Tester

The DH-NM floor wear resistance meter is specially customized for the convenience of customers to measure the wear resistance of floors. It has digital display, measurement, and is convenient and practical.
Main performance parameters
Measurement range: 0-15000H;
Resolution: 10H;
2、 Usage:
In the middle of the handheld instrument, gently place the DH-NM floor abrasion tester on a flat specimen (or test piece) larger than the instrument. When the DH-NM floor abrasion tester comes into stable contact with the specimen, the reading should be taken within 1 second. At this time, the data displayed on the screen is the abrasion resistance value of the tested specimen (test piece). In order to measure accuracy, the average value of the measurement results is taken, which is the wear resistance value of the sample material.
3、 Sample and adjustment
(1) The contact surface needs to be smooth and even.
(2) The sample size should be greater than 100mm in both length and width.
After using the DH-NM floor abrasion tester, remove the battery and place it in a dry place to prevent moisture.

DH-NM Floor Wear Tester/Paint Wear Tester/Wear Tester/Wear Tester/Wear Tester
It can generally be divided into 5 levels, which are formulated based on European standards
Aluminum oxide content, wear-resistant speed equivalent to European standards
33g 4000 2500 RPM AC1-21
38g 6000 4000 RPM AC2-22
45g 9000 6000 RPM ACA3-23
62g 15000 9000Z Convert to A4-32
Compared with solid wood flooring, the wear-resistant layer on the surface of reinforced wood flooring is specially treated to have high hardness. Even if a sharp hard object such as a key is used to scrape it, it will not leave any marks. The biggest advantage of this feature is that you no longer have to hesitate to protect the floor in your daily life.