Note:

1) The 'M' in the specification code represents the current multiple

2) The mutual inductance function is only available for 1.5 (6) A, 1.5 (9) A, and 1 (10) A specification selection

Example of ordering:

If the customer requires DDZY607C-Z single-phase cost controlled intelligent energy meter with voltage of 220V, accuracy level of 1, and current specification of 1.5 (6) A, the corresponding order code is DDZY607CZM16M4H

The design and structure of the electric energy meter can ensure that it does not cause any danger when used under rated conditions;

■ It has bidirectional total, peak, off peak, flat, and valley rate time period electricity metering, and can set combined active power. Colleagues can record programming events, reset events, calibration, power failure, closing and opening events

Featuring 4 rates including peak, off peak, flat, and valley, with a minimum interval of 15 minutes between 14 day time periods

Communicate with handheld computers and PCs through infrared interfaces, RS485 interfaces, and carrier interfaces to complete programming settings and meter reading

Record the total electricity consumption and energy data of each rate for 12 settlement days, and can be read out through infrared, RS485, and carrier interfaces

When the remaining amount is less than the alarm threshold, the energy meter will sound an alarm. When the overdraft amount reaches the overdraft threshold, the energy meter will terminate power supply. When the electricity bill is renewed and the remaining amount is greater than the set value, the energy meter can be closed and power supply can be restored manually

■ Alarm output