Introduction to Cow Manure Drying Machine

A cow manure dryer is a drying equipment that processes a large amount of materials. It operates reliably, has high flexibility, strong adaptability, and has a large processing capacity. While drying, it can also achieve the purpose of sterilization and deodorization. The cow manure dryer is suitable for large, medium, and small livestock farms as well as areas with developed animal husbandry. Different heat sources can be used according to the requirements of the drying products. Such as: gas generator, direct heating hot blast stove, indirect hot blast stove, thermal oil, electric heating, steam, etc. After being dried by a cow manure dryer, cow manure can be used as a culture medium for growing edible mushrooms such as Agaricus bisporus, and can also be sold as feed for breeding turtles, fish, snails, chickens, ducks, etc.

New Cow Manure Drying Process - Cow Manure Dehydrator

Due to the high moisture content and adhesion of cow manure, using a dryer directly would result in higher costs. If a dehydrator is added before the dryer, there are three major benefits:

Benefit 1: It can reduce the moisture content of cow manure, thereby increasing the output of the cow manure dryer and effectively reducing the cost of using the heat source.

Benefit 2: Due to the high initial moisture content of wet cow manure, if a dryer is used directly, it is easy to stick to the wall of the dryer, causing blockage and low yield. Therefore, after using a dehydrator, this phenomenon can be eliminated, allowing cow manure to pass through the drying smoothly.

Structure and working principle of cow manure dryer

The cow manure dryer mainly consists of a heat source, a feeding machine, a feeding machine, a rotary drum, a material crushing device, a discharging machine, an induced draft fan, an unloader, and a distribution cabinet; After dehydration, the wet material is added to the dryer, and under the flipping of the uniformly distributed plate reader in the drum, the material is evenly dispersed in the dryer and fully contacts with the hot air, which accelerates the heat and mass transfer during drying. During the drying process, the material is discharged into the finished product through the star shaped discharge valve in another section of the dryer under the action of inclined plates and hot air.

Technical parameters of cow manure dryer

Note: The equipment model parameters are constantly being improved. If you cannot find the required model in the parameter table, you can contact us directly. Our technicians will configure the equipment that best suits your production needs and site requirements according to your requirements.