Air shower rooms are generally divided into three types based on the materials used:

1) Color steel plate, suitable for workshops with dry environments and few users, low price.

2) Cold rolled steel plate (acid pickling, phosphating, electrostatic spraying), suitable for electronic factories, with a large number of users. Due to the use of stainless steel doors, it is very durable, but the price is relatively moderate.

3) Stainless steel plates (mainly divided into SUS201 and SUS304) are suitable for food processing, pharmaceutical and health product processing industries. The workshop environment is relatively humid but will not rust.

Note: If there are acidic or corrosive gases in the workshop, SUS304 material should be used. This material has the ability to resist weak acids and bases, and can also be designed and selected according to your situation

2、 According to different blowing methods, air shower rooms are generally divided into three types:

1) Single blow type: One side panel with nozzle, suitable for factories with low requirements, such as food packaging or beverage processing, large bucket water production, etc

2) Double blow type: The left and right side panels have nozzles, suitable for domestic food processing enterprises, such as pastry making, dried fruit and other small-scale enterprises

3) Three blow type: Both the left and right side panels and the top have nozzles, suitable for export processing enterprises or industries with high requirements such as high-precision instruments.

Wind shower room configuration instructions:

1) Fan - High pressure centrifugal fan for air conditioning, model: DSX-200, full pressure: 1000Pa, speed: 2800r/1400r/min, power: 750W, working voltage: 380V/50Hz.

2) Wind speed -18-25M/S

3) Nozzle - Made entirely of stainless steel material, with 360 degree directional adjustment and embedded design

4) Filtering System - Adopting a dual filtration system of primary filter and high-efficiency filter. As the primary filter is made of non-woven fabric, it can be cleaned and disassembled, greatly extending the service life of the high-efficiency filter and saving costs.

5) Filtration efficiency -99.99%,>0.3Um

6) Control system - automatic control (also manually controllable) with power indicator light and work indicator light, memory sensitive air shower, infrared photoelectric sensing to start the fan after detecting an object, timed end, and air shower stop

6) Air shower time - LED display shows the shower time (adjustable from 0-99 seconds), usually set once every 20-30 seconds

7) Lighting fixture - embedded LED energy-saving lamp, power: 25W

8) Illuminance -300LXS

9) Optional other functions---

3、 There are several control methods for air shower rooms, including:

1) Electronic Chain - Install electronic interlocking locks at the entrance and exit to ensure that only one door can be opened when powered on, and the two doors cannot be opened at the same time, ensuring the cleanliness of the clean area

2) Door closer - can be installed at the entrance and exit of the door, which can automatically close the door within 90 degrees and also automatically stop at 90 degrees, making cleaning convenient.

3) Ozone sterilizer - built-in, with an ozone output of 100MG/H, for disinfecting and sterilizing the interior of the air shower room

4) Automatic induction door machine - Adding a 90 degree automatic induction door machine on the basis of the original door can achieve door opening without manual operation, and can be controlled by a non touch hand induction controller, microwave probe, fingerprint scanner or password device.

5) Quick rolling shutter door air shower room