SD5096The copper corrosion tester for petroleum products is based on the standards of the People's Republic of ChinaGB/T5096 or ASTMD130The requirements specified in the "Copper Corrosion Test Method for Petroleum Products" apply to the evaluation of the degree of copper corrosion caused by petroleum products such as aviation gasoline, aviation turbine fuel, vehicle gasoline, agricultural tractor fuel, washing solvents, kerosene distillate fuel, and lubricating oil according to the test method specified in this standard.

1、 Main technical features

1Using a digital temperature controller, heater, and electric stirrer to form a constant temperature bath, the temperature inside the bath is uniform; Equipped with a timer, it is used for time control setting and automatic timing during sample testing, and will also provide alarm prompts when the time is up.

2This instrument has4A sample test hole.

2、 Main technical parameters and indicators

1、 Power supply voltage:220V±10%、50Hz；

2、 Temperature sensor: Industrial platinum resistance, with a division number ofPt100；

3、 Temperature control range: Room temperature~200℃ can be set arbitrarily;

4、 Temperature control accuracy:±1℃；

5、 Temperature display mode:LEDDigital display;

6、 Temperature controlled heating power:2100W；

8、 Time control range: 0.01Seconds~99hour99Set arbitrarily；

9、 Time display method:LEDDigital display;

Corrosion standard color palette for use in the United StatesD130-04And our countryGB/T5096-91The Copper Corrosion Test Method for Petroleum Products and the United StatesASTM D3241And our countrySH /T0023-90The standard color plate used for testing the silver corrosion test method of jet fuel.