1JJ-4QType constant speed four link electric mixerbrief introduction

JJ-4QType constant speed four link electric mixer, widely used in universities, environmental protection, scientific research, and hygiene Liquid mixing in laboratories of petroleum, metallurgy, chemical, medical and other units can also be used as a supporting product for reaction kettle devices, especially suitable for applications in sewage treatment plants, and is a commonly used tool for laboratory personnel.

IIJJ-4QType characteristics

JJ-4QThe model adopts advanced brushless DC motor, and the controller adopts dual loop control of speed loop and current loop, with stable speed. It adopts large screen LCD display, has fault alarm function, no noise, and continuously adjustable speed.

IIIJJ-4QType technical parameters

1Power supply: single-phase AC50HZ、220V

2Motor power:4×100W

3Speed:40----- 1500change/Accuracy of speed control: ±1change/divide

4Electronic timing:0----9999minute

4JJ-4QType usage method

First, place the container to be stirred flat on the workbench, insert the stirring rod into the reagent bottle, adjust the positioning nut to fix it, and move the stirring container up and down on the workbench to adjust the height.

Please refer to the user manual of the brushless motor controller for the setting of speed and time.

5JJ-4QtypeDaily maintenance and upkeep

1Properly use and maintain the mixer to keep it in good working condition, which is beneficial for extending its service life.

2Keep the instrument clean and do not pour deep liquid into the machine to avoid affecting its service life.

3Our products are covered by a one-year warranty from the date of delivery, with lifetime maintenance (subject to additional charges for damages caused by human error or improper use).

VIJJ-4Qtypematters needing attention:

When performing forward and reverse functions, this instrument first sets the total set time, and then sets the forward rotation time, reverse rotation time, and intermediate stop time, but the total set time should be equal to the total set time.