Product Features

Adopting imported sensors, with high measurement accuracy, good stability, anti poisoning and anti-interference capabilities.

It has the functions of automatic identification and protection of sensor over concentration, short circuit, and open circuit, as well as automatic detection of sensor failure.

Modular design of sensors for easy calibration and replacement.

Using microcontroller digital acquisition and processing technology, the aging curve of the sensor is automatically corrected to ensure constant sensitivity.

Built in imported dip switch, dial to receive, avoiding physical and logical address discrepancies caused by electronic serial numbers

chaos

HUBS four bus communication method, power and signal lines are designed with no polarity and have automatic protection

Function, to avoid damage to the control system caused by any short circuit of the circuit during construction or use.

Adopting explosion-proof professional design, suitable for Class II gas environment.

AT0501AH/d digital display detector with high brightness LED display, supports infrared remote control operation, can be operated on site

Low/high limit alarm concentration setting and calibration operation.

technical indicators

Gas detection:Combustible gases, VOC organic vapors H₂（ppm）、

CO、H₂S、O₂（VOL）、NH₃（ppm）、

Cl₂、NO、SO₂

Detection principle:Catalytic combustion/electrochemical

Measurement accuracy:±5%FS

Sampling method:Diffusion type

Communication method:HBUS bus system

Working voltage:DC14V~35V (detector terminal voltage)

Display mode:Four digit digital display (optional)

Usage environment:Temperature -40 ℃~+70 ℃,

Humidity 10%~93% RH (no condensation)

Pressure range of 86~106kPa

ruler Inch:70mm×110mm×157mm

Main material:cast aluminum

An empty link thread appears:G1/2 "pipe thread

Protection level:IP65

Professional logo:Exdllct6