Coriander amide waxLicowax C Powder C Wax (FA1) High Temperature Resistant Powder

Product Introduction

Licowax C Powder is an amide wax known for its excellent thermal stability and a range of valuable properties when used in plastics. Low volatility makes it suitable for plastics with high processing temperatures.

Application: General plastics, engineering plasticsPVC、 Color masterbatch.

Function: Anti adhesion (opening agent), lubrication and flow promoter, used as a wetting agent and viscosity control agent in colorants.

Product ParametersDelivery specifications and (*) general properties

Main applications

1、The high thermal stability of Licowax C Powder ensures color retention during the processing of hard PVC and the final stability of the product. It is used as an internal lubricant and flow promoter to improve the surface quality of the finished product. Licowax C Powder improves surface texturing and enhances smoothness in hard PVC film. At this time, the addition amount is 0.1-0.5 phr.

2、Licowax C Powder is used as an anti adhesive agent in soft PVC. As the concentration increases, the anti adhesive effect increases, but the printability and sealing properties decrease at high concentrations. Therefore, the amount added should be adjusted according to various applications, and the commonly used amount is 0.3-1.0 phr.

3、Licowax C Powder is used as an external lubricant in polyolefins, and its most important application is in flat films of woven tapes and LDPE. Licowax C Powder improves the flow properties of polymer melt and helps with the conversion of film tapes. The commonly used dosage is 0.3-1.0 phr. For example, LDPE film is often used as a peeling layer for self-adhesive (adhesive), and its peeling effect can be substantially improved by adding 2.0-3.0 phr of Licowax C Powder.

4InIn PS and ABS, Licowax C Powder is used as an internal lubricant, flow promoter, and also helps with demolding in injection molding. It is commonly used to improve flow and feeding behavior by adding 0.05-0.10phr of Licowax C Powder to PS pellets at a dosage of 0.1-0.5phr. Licowax C Powder can also be sprayed onto pellets by mixing with a drum and then dispersing the water. The method for preparing the water dispersion is to stir Licowax C SWhite into cold water containing 1% wetting Genapo 10 × 100

5Add to nylon0.1-0.5 phr of Licowax C Powder can significantly improve flow necessity. Licowax C Powder has been successfully applied in injection molding, films, and fibers. Adding 0.2-0.5phr of Licowax C Powder to polyoxymethylene can also improve fluidity and enable injection molding of complex shaped products. Thermoplastic polyurethane TPU has surface adhesion during processing, causing difficulties in demolding and product stacking At this point, 0.3-1.0 phr of Licowax C Powder can be added to improve.

6、Licowax C Powder is used as a wetting agent and viscosity control agent in the masterbatch of PS and ABS, with an addition amount of 3.0-5.0 phr. Licowax C Powder can also be used as a carrier to produce high concentration color cakes, coloring PS, ABS, and other thermoplastic plastics.

packaging storage

25KG paper bag, stored at dry and room temperature.

Food Law Status

FDA and other multi country food law approvals