VIP member
Cold and hot shock test chamber, high and low temperature cold and hot shock test chamber
Description: Cold and hot shock test chamber is used to test the degree to which material structures or composite materials can withstand continuous e
Product details
Details
Product Introduction of Cold and Hot Shock Test Chamber, High and Low Temperature Shock Test Chamber, and Rapid Temperature Change Test Chamber
Cold and hot shock test chamber is used to test the degree to which material structures or composite materials can withstand continuous environments of extremely high and low temperatures in an instant, in order to test the chemical changes or physical damage caused by thermal expansion and contraction in a short period of time. The applicable objects include materials such as metal, plastic, rubber, electronics, etc., which can serve as a basis or reference for product improvement.
Characteristics of cold and hot shock test chambers, high and low temperature shock test chambers, and rapid temperature change test chambers
- The three box equipment is divided into three parts: high temperature zone, low temperature zone, and testing zone. The test products are placed in a basket, and when impacted, the basket moves the test products into the high temperature zone or low temperature zone for balancing. The test products are dynamic.
- Adopting a touch based graphical control interface, the operation is simple.
- The impact method applies the air path switching method to import the temperature into the testing area for conducting cold and hot impact tests.
- When subjected to high or low temperature impact, the maximum duration can reach 999H, and the maximum cycle time can reach 9999 times.
- The system can be used as an automatic loop engine or a manual selective impact.
- The cooling system adopts a binary freezing system, which has a fast cooling effect and is water-cooled.
- Cannot test impact at room temperature
Implement standards and test methods that meet the requirements
- GJB150.5 Temperature Shock Test
- GJB360.7 Temperature Shock Test
- GB/2423.22 Temperature Shock Test
Specification table for cold and hot shock test chambers, high and low temperature shock test chambers, and rapid temperature change test chambers
|
type name |
TD-RH80 |
TD-RH150 |
TD-RH252 |
TD-RH480 |
||
|
inside dimensions |
50*40*40 |
60*50*50 |
70*60*60 |
80*80*75 |
||
|
Carton size |
160*180*155 |
185*190*185 |
110*149*113 |
102*164*124 |
||
|
Operation mode |
Fixed value operation/Programmable operation(optional) |
|||||
|
systeminterconnected system |
PIDBalanced temperature control system |
|||||
|
controller |
Control type color LCD display human-machine interface controller |
|||||
|
temperature stability |
≤±0.5℃ |
|||||
|
temperature range |
Test Tank |
R: -40℃～+150℃ |
L: -55℃～+150℃ |
S: -55℃～+150℃ |
||
|
High temperature tank |
+60℃～+200℃ |
+60℃～+200℃ |
+60℃～+200℃ |
|||
|
Low-temperature tank |
-65℃～-40℃ |
-70℃～-10℃ |
-75℃～-10℃ |
|||
|
Impact return time |
≤5 mim |
|||||
|
Inner box material |
Stainless steel mirror light plate(SUS 304#) |
|||||
|
External material |
Stainless steel matte line treatment(SUS 304#)Or spray painted paint(optional) |
|||||
|
Insulation material |
Fine hard polyurethane foam and glass fiber cotton |
|||||
|
Freezing system |
air-cool/water-cooling(optional) |
|||||
|
Double segment design:Fully enclosed or semi enclosed compressor,Environmentally friendly refrigerantR404A+R23 |
||||||
|
Protector |
Non fuse switch,Unfuse fuse,Compressor overload protection switch,High pressure protection switch for refrigerant,Temperature air burn protection switch, under reverse phase protector, fault alarm system. |
|||||
|
join in marriagepiece |
Two adjustable partitions at the bottom and top, with a testing hole of Φ50mm 1hole |
|||||
|
Weight of the test sample(kg) |
5 |
5 |
10 |
15 |
||
|
weight(make an appointmentkg) |
1000 |
1550 |
1680 |
1900 |
||
|
electricitysource |
3Φ5W AC380V±10％50/6OHZ |
|||||
|
pour:The surrounding temperature is20℃～25℃,Relative humidity ≤85%R.Htime,Testing method for temperature and humidity distribution,According to the distance between the inner box and each side1/6Distance effective space measurement. |
||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-