Chongqing small capacity spray dryerProduct Description:
AS-2LThe laboratory small spray dryer is mainly applicable to the production of micro particle powder in universities, research institutes and laboratories of food, medicine and chemical enterprises. It has broad spectrum applicability to all solutions, such as emulsion and suspension, and is suitable for the drying of heat sensitive substances, such as biological products, biological pesticides, enzyme preparations, etc. Because the sprayed materials are subject to high temperature only when sprayed into aerosol particles, they are only heated instantaneously, which can keep the active ingredients of these active materials intact after drying.
Chongqing small capacity spray dryerProduct features:
1. Adopting a color large touch screen operation, combining fully automatic control and manual control, domestically one:
2. Full automatic control: one button startup, after setting spray process parameters, the temperature reaches the preset temperature, the peristaltic pump starts automatically, the touch screen displays the running animation, and the running process is clearly displayed; When shutting down, simply press the stop button and the machine will automatically shut down safely.
3. Manual control: If it is necessary to adjust the process parameters during the experiment, it can be easily switched to manual mode, and the entire experiment process is dynamically displayed on the color touch screen (animation).
4. Shutdown protection function: When shutting down, simply press the stop button, and the machine will immediately stop running except for the fan, ensuring that the equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan).
5. The spray, drying and collection system is made of transparent high-quality high borosilicate heat-resistant glass material, which makes the spray drying process in a pollution-free and stable environment, and makes the entire spray drying experiment process directly observable, providing great convenience for scientific researchers to control the experiment process and experimental results, and can find and solve problems in a timely manner. All glass components are easy to disassemble and clean.
6. Equipped with an imported oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with excellent fluidity and very low noise, less than 60db, which meets the national laboratory noise standards;
7. The atomization structure of two fluid spray, the whole machine is made of high-quality stainless steel precisely, with compact design, no auxiliary equipment, easy to use, and as new as ever.
8. In order to meet the requirements of users to adjust various parameters within the experimental range, real-time PID constant temperature control technology is adopted in the design of drying temperature control, which ensures accurate temperature control in the entire temperature range and a heating temperature control accuracy of ± 1 ℃.
9. In order to maintain the purity of the sample, an air inlet filter is equipped.
10. The feeding amount can be adjusted by the feeding peristaltic pump, and the small sample volume can reach 50ml. Magnetic stirrer is optional
11. The dried finished dry powder has a relatively uniform particle size, with over 95% of the dry powder within the same particle size range.
12. The HL-2000ML laboratory small spray dryer is equipped with a nozzle cleaner (through needle) for viscous materials. When the nozzle is blocked, it will automatically clear, and the frequency of through needle can be automatically adjusted;
13. Innovative tower wall blowing device with higher material recovery rate.
Technical parameters:
1. Double control mode of full automatic control and manual control of spray dryer, dynamic display (animation) of color touch screen throughout the experiment
2. Inlet air temperature control: 30 ℃~300 ℃
3. Air outlet temperature control: 30 ℃~140 ℃
4. Evaporation water volume: 1500mL/H~2000ml/h
5. Large feed rate: The peristaltic pump can be adjusted up to 2000ml/h
6. Small feed volume: 50mL
7. Upgradeable to dual level separation collection system
8. Real time PID constant temperature control technology, heating and temperature control accuracy: ± 1 ℃
9. Drying time: 1.0-1.5s
10. Equipped with shutdown protection function: When shutting down, simply press the stop button, and the machine will immediately stop running except for the fan, ensuring that the equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan).
11. Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency
12. Nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional, and can be customized according to requirements
13. Equipped with a nozzle cleaner (through needle), it will automatically clear when the nozzle is blocked, and the frequency of the through needle can be automatically adjusted
14. The whole spray dryer is made of stainless steel, and the atomization structure of two fluid spray is adopted. The spray, drying and collection system is made of transparent high-quality high borosilicate heat-resistant glass materials
15. Equipped with an imported oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with good fluidity and very low noise, meeting the national laboratory noise standards;
16. Whole machine power: 3KW/220V
17. Tower wall blowing device, higher material yield
18. Spray head cooling device (optional)
19. Can be directly upgraded to a nitrogen circulation system for drying organic solvent materials
20. Equipment dimensions: 1200mm (height) x 650mm (length) x 500mm (width)

21*21000 yuan