VIP member
Chloride ion chloride online measuring instrument
Brief description: The chloride ion chloride online measuring instrument PM8202I/PM8200I, combined with the sensor Bsens720, can continuously monitor
Product details
Chloride ion chloride online measuring instrument
Chloride ion chloride online measuring instrumentPM8202I/PM8200IThe ion selective electrode has low one-time investment, regular electrode calibration to ensure reliable measurement, a menu in both Chinese and English, simple operation, and users can use it freely without reading the manual.
Online measuring instrument PM8202I/PM8200I Product parameters:
model |
PM8202I |
PM8200I |
Star measurement range |
0-20000mg/L, -10-130^ |
|
resolution |
0.01 mg/L; 0.1 |
|
temperature compensation |
-10~130t：manual/Automatic;(NTC10K/PT1000) |
|
Wen degree |
Operating Temperature-10~70.0t;Storage temperature:-20~70.0tOperating Temperature0-70.01);Storage temperature:-20~70.0t |
|
apparent show |
Large backlit dot matrixLCD |
|
language words |
Chinese/English |
|
save store |
60Ten thousand pieces of data |
|
electricity source |
90-260VAC,50/60Hz; 24VDCoptional |
|
transmitter output |
2Road isolation transmission4-20mAOutput, Loop500Q, 0.1%F.S,Can set measurement values and temperatures |
|
communication function |
RS485Modbus |
RS485 Modbus, HART (optional) |
Cleaning output |
Cleaning interval:0.1-1000hAdjustable, cleaning time:1-1000Sadjustable |
|
alarm output |
2Group independenceHi/LAlarm point with hysteresis setting,5A/250VAC/30VDC |
|
Installation method |
Wall mounted, pipe mounted, panel mounted |
|
Protection level |
IP65 |
|
Overall Dimensions |
144x 144x 108mm 144 x 144 x 106mm |
|
cutout size |
138 x 138 mm |
|
heavy quantity |
0.87KG 0.86KG |
|
Technical parameters of sensor Bsens720:
Model: Bsens720
Measuring range: 0~30000mg/L
Resolution: 0.01mg/L
Accuracy: ±3%F.S.
Electrical material: PPS
Operating Temperature -5~70.0℃
zHigh voltage resistance: 3.5bar
Link method: fixed
Thread size: PG13.5
Cable length: 5m
Maintenance and upkeep:
1. Electric cleaning: Rinse or soak the electric surface with pure water. If it is not cleaned thoroughly, consider the properties of the test solution and choose the corresponding reagents. However, the rinsing or soaking time should not be too long. After using other reagents, rinse immediately with pure water.
2. Replace the membrane head: For gas sensitive materials, it is commonly used as a sensitizing membrane. If any measurement problems are found, the membrane head can be replaced and the electrolyte can be re added. Generally, there are around three built-in batteries.
3. Electric filling fluid: usually replaced every three months. There is a corresponding description in the electrical manual.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-