Chain board dryer

Chain plate dryer is a batch and continuous production drying equipment, with main heating methods including electric heating, steam heating, and hot air heating. The main principle is to evenly spread the materials on the chain plate. The chain plate adopts 12-60 mesh steel wire chain plate, which is dragged back and forth in the dryer by the transmission device. Hot air flows through the materials, and water vapor is discharged from the dehumidification hole to achieve the purpose of drying. The length of the box is composed of standard sections. In order to save space, the drying mechanism can be divided into multiple layers. Common ones include two chamber three layer, two chamber five layer, with a length of 6-40m and an effective width of 0.6-3.0m.

Spread the materials evenly on the steel wire chain plate, and move back and forth in the dryer by the chain plate conveyor belt. Hot air flows through the materials, and water vapor is discharged from the dehumidification holes to achieve the purpose of drying. The drying time of a chain plate dryer is generally 20-30 minutes, and a high-temperature drying furnace is composed of a chain conveyor made of heat-resistant steel and a high-temperature tunnel kiln. The conveyor belt adopts high-temperature resistant metal chain plates, and the materials are dried on the chain plates for 25-30 minutes before being output by the cooling chain plates.

Specification and model	WD6	WD8	WD10	WD12	WD16	WD20	WD24	WD30
Mesh belt width (mm)	600	800	1000	1200	1600	2000	2400	3000
Length of drying section (m)	6-12	6-12	6-16	8-16	8-22	10-26	12-30	12-40
Feed section length (m)	1	1	1	1	1	1.5	1.5	2
Transmission section length (m)	1	1	1	1	1	1.5	1.5	2
Dry area (m2)	3.6-36	4.8-48	6-80	7.2-96	12.8-105.6	20-260	28.8-360	36-600
Number of layers	1-5
Layer spacing mm	400-600
bearing capacity	90-200 Kg/m2
Usage temperature	Carbon steel ≤ 400 ° C, stainless steel ≤ 600 ° C
evaporation intensity	5-20 kg water/m2. h
heat source	Hot air, electricity, steam
running speed	0.06-1m/min
Transmission power Kw	1.1-2.2	1.1-2.2	1.1-2.2	1.1-3	1.5-3	1.5-4	3-7.5	5-11
Supporting equipment	Conveyor equipment, hot blast stove, dust removal equipment, induced draft fan, etc