product description

The prefabricated hot-dip galvanized water tank is a new type of water tank manufactured according to 92SS177. The manufacturing and installation of this product are not affected by civil construction, and do not require welding equipment. The surface is treated with hot-dip zinc anti-corrosion, which is beautiful and durable, prevents secondary pollution of water quality, is beneficial to human health, and meets the requirements of standardization, serialization, and industrialization of building products.
This product is made of Q235 steel plate, stamped to form 1000 × 1000 and 1000 × 500 standard blocks, drilled around the edges, hot-dip galvanized, and installed on site. During assembly, non-toxic rubber pads are sandwiched between the standard blocks and bolted together.
This product is suitable for storing and regulating water tanks for building water supply, expansion and condensation water tanks for heating systems, as well as temporary water storage tanks for construction, geological exploration, industrial, and national defense projects.
The water storage capacity ranges from 1.0 cubic meter to 1000 cubic meters, and the height can reach 5 meters.
The diameter and position of the inlet pipe, outlet pipe, and overflow pipe of the water tank are determined by the design; There should be a channel of no less than 7000mm around the water tank, and the bottom and accessories of the tank should be hot-dip galvanized.
Water filling test: After assembling the water tank, close the outlet and drain pipes, open the inlet pipe, and check while draining water until it is full. If there is no water leakage after 2-3 hours, it is considered qualified.
The bottom and sides of the 1-meter-high water tank are 3.0mm.
The bottom of the 2-meter-high water tank is 3.0mm on the side
A 3-meter-high water tank bottom with a 3.0mm side profile
The bottom of the 4-meter-high water tank is 5.0mm on the side, and 3.0mm on the second, third, and fourth floors.

1. The environmentally friendly stainless steel spherical water tank is manufactured using a new high-energy forming process. 2. The material is made of SUS304 stainless steel, which has strong corrosion resistance. 3. The spherical water tank has a reasonable design, uniform pressure, low wind load, and good sealing, completely eliminating harmful substances and small animal invasion in the air, ensuring that the water quality is not subject to secondary pollution. 4. Scientific water flow design, natural layering of normal domestic and fire-fighting water, clear and hygienic domestic water coming out of the spherical water tank, and significantly increased water pressure. Sediments in the water can be discharged by regularly opening the bottom drain valve of the spherical water tank, without the need for frequent manual cleaning. 5. The spherical water tank is lightweight, only a fraction of the weight of a concrete water tank. It has a beautiful appearance and can be used in conjunction with advertisements, making it an excellent environmentally friendly product.