Characteristics of cement mortar carding machine

After the completion of the concrete structure, the next process will enter the painting stage (some called batch casting). Due to the fact that concrete and painting mortar are two different materials with different shrinkage rates, thermal conductivity, etc., applying cement mortar on a relatively flat surface of concrete will result in non adhesion between the two, known as "hollowing". Over time, these cement mortar layers will fall off. In order to eliminate this quality hazard, it is often necessary to perform a roughening treatment on the surface of the old concrete. Cement is added with construction adhesive and yellow sand, and a spraying machine is used to spray uneven mortar layers on the concrete surface. There is also a name for this, which is "wall roughening treatment" in order to bond firmly.
The WZ-2 type carding machine can not only be used for carding and throwing points, but also for spraying water slurry and cement mortar.
1. There is basically no dust on the ground, saving water and materials, with low investment and high efficiency, which can reduce costs by more than 20%;
2. Easy to operate, no need to set up scaffolding, no need to move equipment, no need to repair stubble, both internal and external corners, and the top plate can be sprayed freely
Tu has shortened the construction period, improved career progress, and saved expenses on framework materials
3. Fast speed, high efficiency, low labor intensity, one spraying machine can easily spray 2000-3000 square meters per hour
4. The engineering quality is guaranteed. The main disadvantages of artificial powder wall and powder wall machine are insufficient adhesion between mortar and wall, and insufficient compactness of mortar. The machine has a large flow rate and high pressure, and the compactness of mortar far exceeds the national standards, avoiding difficulties and losses caused by quality, construction period, labor cost and other issues
5. One machine is versatile, capable of spraying mortar bristles and fire-resistant materials such as refractory materials, real stone paint, waterproof coatings, cement paste, simple putty spraying, and interface agents. It is not affected by regional and environmental conditions or the shape of the spraying surface

Technical parameters of cement mortar carding machine

working form	screw pump
Maximum pressure	3Mpa
Maximum material diameter for conveying mortar	2mm
Main motor	4KW 380v
Vertical conveying distance	10m
Horizontal conveying distance	20m
Whole machine weight	150kg
Dimensions (length x width x height)	1450×370×750mm

Physical picture of cement mortar carding machine

Due to differences in production batches and specific models, the above pictures are for reference only. For more details, please contact our sales personnel for specific verification