VIP member
Carbon dioxide incubator (gas jacket/water jacket)
Features: -7-inch touch screen display control interface - humidity display function (optional) - with automatic zero calibration function -90 degree
Product details
characteristic:
-7-inch touch screen display control interface
-Humidity display function (optional)
-Equipped with automatic zero calibration function
-90 degree high temperature and high humidity disinfection
-Using glass doors for direct heating and temperature control to reject
Glass door condensation and more uniform temperature
-Door switch monitoring function
-Logging function
-Fault monitoring, alarm, and recording functions
-Level 4 password function: login password, operator password, administrator password,
Senior administrator password
-Three power failure mode selection functions: power failure recovery, stop or restart
-Curve display function
-Real time data and historical data printing function
-Comprehensive circular arc design reduces bacterial growth environment
-232 communication interface
-485 communication interface
Accurate temperature control:
Two circulating fans are equipped with two internal high efficiency particulate air filters (HEPA):
|
|
The pollution brought in by opening the door instantly purifies and cultivates a safer environment After opening the door and starting, the CO2 concentration quickly returns to a constant level, and the cells are at their optimum Growing in a pH stable environment, stable temperature increases trust and refinement Cell culture environment. After opening the door and starting, the CO2 concentration quickly returns to a constant level, and the cells are at their optimum Growing in a suitable pH environment. -For STIK products -For the products of Company B |
| Stable temperature provides the most trusted and cell culture environment | After opening the door and starting, the CO2 concentration quickly returns to a constant level, and the cells grow in the most suitable pH environment. -For STIK products - for B company products |
90 degree high temperature and high humidity sterilization
|
|
According to third-party testing, the 90 degree high temperature and high humidity sterilization method effectively achieves thorough sterilization effect, reducing damage to the electrical components of the incubator |
Reduce pollution, internal and external university filtration systems (HEPA)
| Built in dual high school particulate air (HEPA) filtration system | External intake HEPA filter; All gases entering the incubator are filtered through a 0.2um filter to prevent external contamination |
|
Carbon dioxide gas intake stabilization system: |
| The full arc mechanism of the inner liner reduces bacterial contamination | Stable air pressure ensures a more stable supply of carbon dioxide gas to the incubator |
0
| Gas jacket carbon dioxide tank | Water jacket carbon dioxide tank | ||
| model | ILDT-185IU | ILDT-185IH | ILW-185TI |
| Volume (liters) | 185 | 185 | 185 |
| Temperature range | Environmental humidity+5~60 ℃ | ||
| Temperature uniformity | ≤±0.4℃ | ||
| temperature control accuracy | ± 0.1 ℃ | ||
| Temperature recovery time (1 minute after opening the door) | ≤ 5 minutes | ||
| Usage environment | Less than the set temperature by 5 ℃ (it is recommended that the ambient temperature be 8 ℃ lower than the set temperature during long-term use) | ||
| CO2 concentration range | 0~20% | ||
| CO2 control accuracy | ±0.1% | ||
| C02 sensor | Imported infrared (IR) sensor | ||
| C02 Summer Recovery Time (1 minute after opening the door) | ≤ 5 minutes | ||
| Disinfection method | Ultraviolet lamp | 90 ℃ high temperature and high humidity | Alcohol wiping |
| Internal circulation high-efficiency filter | 2 of them | 2 of them | 2 of them |
| Air intake high-efficiency filter | 1 piece | 1 piece | 1 piece |
| Heating glass door | standard configuration | standard configuration | standard configuration |
| Humidification method | Humidifying plate | ||
| Humidity display | Optional | ||
| Humidity range | 92%RH±3% | ||
| Automatic gas cylinder converter | Optional | Optional | Optional |
| printer | Optional | Optional | Optional |
| operation temperature | 5-35 ℃ (It is recommended that during long-term operation, the ambient temperature should be below 30 ℃) | ||
| power supply | AC220V±10% 50HZ/80HZ | ||
| Inner container size (W * D * H) mm | 540*510*680 | ||
| Dimensions (W * D * H) mm | 710*695*985 | ||
| Shelf (standard) | 470 * 470 (4 pieces) | ||
| maximum power | About 800W | ||
| Factory standard plug | 10A | 10A | |
| Product weight | About 150kg | About 165kg | |
-The testing technical data is only applicable to the test results under no-load conditions of the equipment and at an ambient temperature of 25 degrees Celsius!
-Product appearance and parameter changes will not be notified separately. The product appearance may deviate due to photography, printing, and other reasons. We apologize for any inconvenience caused!
-Humidity sensor
-Automatic gas cylinder converter
-GPRS mobile SMS alarm
-Printer
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-