1Product Introduction:

After the CYB3351DP/GP transmitter is equipped with a remote transmission sealing device, it becomes a remote differential pressure/pressure transmitter.

CYB3351DP/GP remote differential pressure/pressure transmitter is a reliable measurement method that avoids direct contact between the measured medium and the isolation diaphragm of the transmitter. It is suitable for the following situations:

1.When the tested medium has a corrosive effect on the transmitter connector and sensitive components;

2.When it is necessary to isolate the high-temperature measured medium from the transmitter;

3.Solid suspended solids or high viscosity in the measured medium can easily block the transmitter connector andWhen in pressure chamber;

4.When the tested medium is easily solidified or crystallized when led out with a pressure tube;

5.When replacing the tested medium, it is necessary to rinse and not mix it together;

6.Hygiene conditions must be maintained to prevent contamination.

twoTechnical indicators：

1. Target audience: liquids, gases, and vapors

2. Measurement range: 0-7.5Kpa - 2.5MPa

3. Accuracy: ± 0.25%, ± 0.5%

4. Output signal: 4-20mA DC

5. Power supply: 12-45V DC, usually 24V DC

6. Indicator: LCD display

7. Explosion proof grade: a: Explosion proof type (Exd Ⅱ BT5 or Exd Ⅱ CT6)

b: Intrinsic safety type （Exia Ⅱ CT6 or Exib Ⅱ CT6)

8. Sensor material: 316L

9. Flange diaphragm material: 316L (factory standard), Hastelloy, Tantalum, Titanium, Monel, Teflon spray coating

10. Flange material: 304, 316

11. Process connection: flange installation, sanitary clamp installation, etc

threeSingle remote transmissionSelection table for diaphragm type intelligent differential pressure transmitter：

four、CYB3351 Remote Transmission Connection Device

2. Clamp type (1199SCW) remote transmission

3. Insertion tube (1199EFW) remote transmission

4 pairs of clip on (1199PFW) remote transmission