CW seriesworm gear reducerinclude:

CWU - Circular cylindrical worm gear reducer with worm gear under the worm wheel.

CWS - Circular cylindrical worm gear reducer with worm gear on the side of the worm wheel.

CWO - a circular cylindrical worm gear reducer with a worm gear above the worm wheel.

Three models have a center distance of 63mm to 500mm, with 16 different center distances; There are twelve types of numerical ratios ranging from 5 to 63.

CWU400worm gear reducerIt is a universal circular arc tooth cylindrical worm gear reducer with a worm gear under the worm wheel. Suitable for deceleration transmission of various mechanical equipment in metallurgy, mining, lifting, transportation, chemical industry, construction, etc. The center distance between the worm gear and worm of this reducer is 400mm; the maximum input power is 90KW; the maximum output torque is 15000N. m, and the input shaft speed is generally not greater than 1500 r/min; The high-speed shaft can operate in both directions; The working environment temperature ranges from -40 ℃ to 45 ℃; When the working environment temperature is below 0 ℃, the lubricating oil must be heated to above 0 ℃ before starting. There are nine speed ratios: 8, 10, 12.5, 16, 20, 25, 31.5, 40, and 50, and four assembly forms. And various non-standard reducers can be designed and produced according to user needs

Installation instructions:

Before installing the worm gear reducer, add gear oil to the reducer first. During installation, it must be firmly installed on the machine without any looseness. During this process, it is necessary to confirm whether the direction of the gearbox is correct before intermittent installation operations can be carried out.