CMAS100-SL Portable Device Status Monitor

Adopting a lightweight, compact, and ergonomic design, it can be cleverly placed in production lines, pockets, or toolboxes. The device is rated IP 54 for use in industrial environments and is particularly durable.
The alarm and danger warning functions increase your confidence in diagnosing faults.
Simultaneously measure speed, envelope acceleration, and temperature to save time.
SKF machine condition consultants have the characteristics of high efficiency, affordability, and environmental friendliness. They can be recharged and run for 10 hours on a single charge.
High flexibility, can work together with standard 100 mV/g constant current accelerometers. Optional external sensors can be used in difficult to access locations and to obtain more reproducible and accurate measurement results.
For the convenience of users, the product features support English, French, German, Portuguese, Spanish, and Swedish.
A single device can obtain multiple measurement results. SKF machine condition consultant provides the overall "speed" vibration degree of the vibration signal in the measuring machine, and automatically compares them with the standards preset by the Organization for Standardization (ISO). When the measured value exceeds those standards, the device will display a "warning" or "danger" signal. At the same time, the device will read the measured value of "envelope acceleration" and compare it with the established bearing vibration standard to verify the bearing fit or indicate potential bearing damage. SKF portable equipment status monitoring devices also use infrared sensors to measure temperature and indicate abnormal temperatures.

Accuracy, flexibility, and confidence
During measurement, the acceleration sensor input signal of the SKF portable device status monitor is processed to provide two different measurement values for each POINT on the machine, namely overall velocity and envelope acceleration. At the same time, the non-contact infrared sensor of the SKF portable device status monitor measures the surface temperature of the measurement location and displays all three measurement values simultaneously. Simultaneously display on the LCD panel (depending on the system settings of SKF machine status consultant):

Metric or Imperial units
Speed (mm/s RMS or /S derived peak value)
Temperature (Celsius or Fahrenheit)
Envelope acceleration reading in gE

CMAS 100-SL
Envelope acceleration
speed
Alarm display:
(A) Warning or
(D) Danger
ISO Machine Group
Select button
Browse button
temperature
Measurement Status
Envelope acceleration level
Battery indicator (60% remaining)

Technical Parameter
Vibration sensor:
-Internal: Comprehensive piezoelectric acceleration
-External: Accepting standard 100 mV/g constant current accelerometer
Temperature sensor: internal infrared sensor
Measurement:
- Speed: Range: 0.7 to 65.0 mm/s (RMS) (0.04 to 3.60 in./s (equivalent peak load)), compliant with ISO standard 10816-3
Frequency: 10 to 1000 Hz, compliant with ISO 2954
- Envelope acceleration: Range: 0.2 to 50.0 gE
·Frequency: Similar to 3 frequencies (500 to 10000 Hz)
- Temperature: Range: -20 to+200 ° C (-5 to+390 ° F)
Infrared temperature accuracy: 2 ° C (4 ° F)
Distance: Short range, more than 10 cm (4 in.) away from the target
Working temperature range: Indoor use: -10 to+60 ° C (15 to 140 ° F)
When charging: 0 to 40 ° C (30 to 105 ° F)
Storage temperature:
- Less than one month: -20 to+45 ° C (-5 to+115 ° F)
- More than one month but less than six months: -20 to+35 ° C (-5 to+95 ° F)
Humidity: 95% relative humidity, non condensing
Shell: IP 54
Certification: CE
Fall test: 2 meters (6.6 feet)
Weight: 125 g (4.4 oz)
Size:
- Length: 200,0 mm (7.90 in.)
- Width: 47,0 mm (1.85 in.)
-Height: 25.4 mm (1.00 in.)
Battery life: Recharge after 10 hours (-1000 measurements)
-Equipped with external sensors: more battery life will be reduced by 55%
Supported external sensors: Any standard accelerometer with a constant current sensitivity of 100 mV/g
External sensor power supply: 3.5 mA, 24 V DC
Charger specification: Universal AC/DC wall plug type
Input: 90 to 264 V AC, 47 to 60 Hz
Output: 5 V DC, stable
Can be fully charged in 3 to 4 hours