characteristic

• Fully integrated pre installed system coverage390-950The wavelength range is nm, and the optical resolution is1.0nm(FWHM)

• Microsystems are an ideal choice for laboratories and teaching.

• Directly connectedDeuterium tungsten lamp source/violet LED light source and sample holder

• The minimum integration time is 3.8ms

• pass throughUSB2.0The interface can quickly connect the spectrometer to the computer

Directly connected light source

CHEMOSB4-VIS-NIR fiber optic spectrometerUsing a sample holder in combination（1-cmTest tube and purpleLEDEnhanced tungsten lamp light source（390-900nmofUSB-ISS-VISfiber spectrometerTo measure the relative absorbance. This system can enhance the blue light signal, and the lifespan of the light bulb exceeds45,000Hour.

Programmable microcontroller

CHEMOSB4-VIS-NIR fiber optic spectrometerUse ourUSB4000 a spectrometer.USB4000The spectrometer comes with a programmable microcontroller, which can easily control the spectrometer and its accessories. Through a 22 pin connector, you can perform all operational parameters in the software: control the light source, create processes, and obtain information from external devices. The microcontroller has 8 programmable digital input/output interfaces for exchanging data with external devices (contact our engineering and technical personnel for relevant information to write GPOs programs). ）

Standard component design

Ocean Optics provides a complete set of fiber optic sample accessories and teaching tools to enhance your CHEMOSB4-UV-VIS system. Most accessories come with SMA905 connectors for various applications; Changing the sample system is also very simple, just remove the connector and add new components and accessories.

To gain more flexibility, consider purchasingCHEM4-UV-FIBERtypefiber spectrometer.CHEM4-UV-FIBERfiber spectrometerIt is a fiber optic system that allows you to quickly and easily connect light sources to fiber optic accessories such as reflective probes or transmissive immersion probes.

Plug and play operation

CHEMOSB4-VIS-NIR fiber optic spectrometerpass throughUSB2.0perhapsRS232The serial interface can be connected to computers, handheld computers, or other built-in controllers. When using a serial port, it is necessary to provide the system with5Volt power supply (not included). The proprietary parameter data of each spectrometer is written in the memory on USB4000; Our spectrometer operating software reads these values for parameter adjustment and heat exchange between computers.

Serial Port Operation TipsWhen using a serial port, it is necessary to provideUSB4000System provided5External power supply for volts (not included).SpectraSuiteThe spectrometer software does not support spectrometer operation through serial ports. However, with the built-in serial port command settings, you can write your own software program that can be used for serial port operations.

Convenient calibration

To ensure the quality of wavelength calibration for your spectrometer, we recommend our anti drift calibration light source products to you. Click to enter specific information.

specifications