CA6140 lathe/CA6150 horizontal lathe-Fornitore globale

CA6140 lathe/CA6150 horizontal lathe details

The bed of this series of lathes is wider than that of ordinary lathes, with a guide rail width of 400mm and high rigidity. The guide rail surface has undergone medium frequency quenching and is durable and wear-resistant.

The machine tool operation is flexible and centralized, and the slide is equipped with a fast moving mechanism. Adopting a single handle for visual operation, with good user friendliness.

The structural stiffness and transmission stiffness of the machine tool are higher than those of a general lathe, with high power utilization and suitable for strong cutting.

Before leaving the factory, the machine tool is strictly inspected according to the inspection procedure, and a strong cutting test is conducted to ensure that the machine tool has good accuracy stability and machining reliability.

CA6140 lathe/CA6150 horizontal lathe parameters

project		CA6140		CA6150
swing over bed		mm	400	500
Maximum workpiece rotation diameter on the tool holder		mm	210	300
maximum length of workpiece		mm	1000	1000
Maximum turning length		mm	980	980
Distance from spindle center to bed plane guide rail		mm	205	250
Front taper of spindle hole		name	Mo's 6	mohs6
Spindle speed	Number of positive conversions	species	24	24
-	Reverse the number of species	species	12	12
-	Range of forward rotation speed	RPM	16-1400	10-1400
spindle bore		mm	52	52
feed	Number of types of vertical and horizontal feed rates	species	Each 64	every64
-	Vertical standard feed rate of tool holder per spindle rotation	Millimeter/RPM	0.08-1.59	0.08-1.59
-	Longitudinal fine feed rate of tool holder per rotation of spindle	Millimeter/RPM	0.028-0.054	0.028-0.054
-	The feed rate of the tool holder increases longitudinally with each rotation of the spindle	Millimeter/RPM	1.71-6.33	1.71-6.33
-	Horizontal standard feed rate of tool holder per spindle rotation	Millimeter/RPM	0.04-0.79	0.04-0.79
-	Horizontal fine feed rate of tool holder per rotation of spindle	Millimeter/RPM	0.014-0.027	0.014-0.027
-	The feed rate of the tool holder increases laterally with each rotation of the spindle	Millimeter/RPM	0.86-3.16	0.86-3.16
-	Rapid longitudinal movement speed of the knife holder	M/Min	4	4
-	Quick lateral movement speed of the knife holder	M/Min	2	2
Turning thread range	Number of metric thread types	species	44	44
-	Range of metric threads	mm	1-192	1-192
-	Number of thread types in the imperial system	species	21	21
-	British thread range	Button/inch	2-24	2-24
-	Number of types of modular threads	species	39	39
-	Modular thread range	mm	0.25-48	0.25-48
-	Number of types of radial threads	species	37	37
-	Range of radial thread	Teeth per inch	1-96	1-96
Maximum travel of the lower knife holder		mm	320	320
Maximum travel of upper knife holder		mm	140	140
Rotation angle of turret turntable		-	±90°	±90°
Distance from spindle centerline to tool support surface		mm	26	26
Sectional dimensions of the blade holder		mm	25×25	25×25
Bed tail spindle diameter		mm	75	75
Maximum travel of bed tail spindle		mm	150	150
Bed tail spindle hole taper		-	Mo's No. 5	mohs5name
Screw pitch		mm	12	12
Main motor model		-	Y132M-4	Y132M-4
power		kW	7.5	7.5
rotational speed		RPM	1500	1500
Cooling pump model		-	AOB-25	AOB-25
power		tile	90	90
internet traffic		l/min	25	25
Model of fast moving motor for slide board		-	YSS2-5634	YSS2-5634
power		tile	250	250
rotational speed		RPM	1500	1500
Main drive V-belt model		-	B-2134	B-2210
number of roots		root	4	4
Lubrication pump V-belt model		-	0-1000	0-1000
number of roots		root	1	1
Net weight of the host	Machine tool with a maximum workpiece length of 1500 millimeters	kg	2350	2290
Machine tool outline dimensions (Length x Width x Height)	Machine tool with a maximum workpiece length of 1500 millimeters	mm	3150×1140×1750	3150×1140×1750

CA6140 lathe/CA6150 horizontal lathe configuration

Serial Number	name	Specifications or markings	quantity	Placement location
1	Ordinary lathe	C6150F type	1 unit	-
2	square box socket wrench	17×135/SP2-3	1 set	-
3	three jaw chuck	Φ 200/C6 (including wrench)	1 set	-
4	Mohs 5-6 socket	2093	1 piece	-
5	Mohs No.5 ejector pin	2541	2 pieces	-
6	open end wrench	19-24/N2S91	1 piece	-
7	Round nut wrench	28-32/N2S93-1	2 pieces	-
-	-	38-42/N2S93-1	2 pieces	-
-	-	78-85/N2S93-1	1 piece	-
8	allen key	5、6、8、10/S91-7	4 pieces	-
9	V-belt	2208 type	3 pieces	Installed on the machine tool
10	anchor bolt	M16×400/J23-8	6 sets	-
11	Underlay iron	8516	6 pieces	-
12	Top pad iron	8517	6 pieces	-