C6140 ordinary lathe/horizontal lathe-Fornitore globale

C6140 ordinary lathe/horizontal lathe details

Commonly used for processing internal and external rotating surfaces, end faces, and various internal and external threads of workpieces, with corresponding tools and accessories, it can also be used for drilling, expanding holes, tapping, and rolling. The ordinary lathe is the most widely used type of lathe, accounting for about 65% of the total number of lathes. It is called a horizontal lathe because its spindle is placed horizontally

1. High low-frequency torque and stable output

2. High performance vector control

3. Fast torque dynamic response and high speed stability accuracy

4. Slow down and stop quickly

5. Strong anti-interference ability

A lathe is a machine tool that mainly uses cutting tools to turn rotating workpieces. On the lathe, corresponding machining can also be carried out using drill bits, reaming drills, reamers, taps, dies, and rolling tools. Mainly used for machining shafts, disks, sleeves, and other workpieces with rotating surfaces, mainly cylindrical, it is the most widely used type of machine tool in mechanical manufacturing and repair factories.

C6140 ordinary lathe/horizontal lathe parameters

Main technical parameters		C6140 ordinary lathe
Processing capability	Maximum turning diameter on the bed (mm)	400
	Maximum rotation diameter on the tool holder mm	214
	Center distance mm	750/1000/1500
	Bed width mm	360
main shaft	Spindle speed range rpm	28-1800rpm(12)
	Spindle end dimension mm	C6
	Taper of spindle bore	MT6
	Spindle through-hole diameter mm	52
trailer	Horizontal skateboard travel mm	290
	Small knife holder stroke mm	150
	Sectional dimension of cutting tool holder mm	22×22
feed	Metric thread range (number of types)	0.5-14mm(21)
	British thread range (number of types)	72-2.5inch(30)
	Modular thread range (number of types)	0.25-7m(17)
	Range of radial threads (number of types)	144-5D.P(30)
tailstock	Tail socket taper	MT5
	Tail socket sleeve diameter mm	65
	Tail socket travel mm	160
Main motor power kw		5.5

C6140 ordinary lathe/horizontal lathe configuration

1. Three jaw chuck

2. Socket wrench

3. Pad iron

4. Foundation bolts

5. Tail seat