C6136 ordinary lathe/horizontal lathe-Fornitore globale

C6136 ordinary lathe/horizontal lathe details

The C6136 ordinary lathe is a horizontal lathe that can perform multiple processes on various types of workpieces such as shafts, disks, and rings. It is commonly used to machine the internal and external rotating surfaces, end faces, and various internal and external threads of workpieces. Corresponding tools and accessories are used, and drilling, hole expansion, tapping, and rolling can also be carried out. The ordinary lathe is the most widely used type of lathe, accounting for about 65% of the total number of lathes. It is called a horizontal lathe because its spindle is placed horizontally

1. High low-frequency torque and stable output

2. High performance vector control

3. Fast torque dynamic response and high speed stability accuracy

4. Slow down and stop quickly

5. Strong anti-interference ability

C6136 ordinary lathe/horizontal lathe parameters

Main technical parameters		C6136
Processing capability	Maximum turning diameter on the bed (mm)	360
	Maximum rotation diameter on the tool holder mm	190
	Center distance mm	750/1000/1500
	Bed width mm	360
main shaft	Spindle speed range rpm	36-1600rpm(12)
	Spindle end dimension mm	C6
	Taper of spindle bore	MT6
	Spindle through-hole diameter mm	52
trailer	Horizontal skateboard travel mm	180
	Small knife holder stroke mm	95
	Sectional dimension of cutting tool holder mm	22×22
feed	Metric thread range (number of types)	0.5-14mm(18)
	British thread range (number of types)	40-2inch(28)
	Modular thread range (number of types)	0.25-3.5m(17)
tailstock	Tail socket taper	MT5
	Tail socket sleeve diameter mm	65
	Tail socket travel mm	160
Main motor power kw		4

C6136 ordinary lathe/horizontal lathe configuration

square box socket wrench	17×135/SP2-3
three jaw chuck	Φ 200 (or Φ 200/C6)
Morse 4-5 socket	2093
Mohs 4-6 socket	2093
Mohs No.4 ejector pin	2541
Round nut wrench	28-32/N2S93-1
－	38-42/N2S92-1
－	78-85/N2S93-1
－	135-145/N1S93-1
Three jaw chuck with flange plate	8313
open end wrench	19-N2S91-24
allen key	6、8、10/S91-7
change gear	m=1.5z=45、48、90、96
－	36, 44, 70, 80, 95, 120, 127 teeth
V-belt	2286 type
anchor bolt	M16×400/J23-8
Underlay iron	8516
Top pad iron	8517